|
302 oil pan
I have a 302 GT 40 from Summit on the left side of the pan there is a 1 3/4 hole for something. The local ford guys don't know its to big for an oil level sending unit so what is it. Someone thought it might be an oil pan for a engine going to Australia. I don't want to change the pan if I don't need to any ideas?
Thanks, Tom |
Yes, that hole is probably for a sending unit. There's a plug/fitting that goes in the hole. The fitting has a threaded hole in the middle. The sender screws in to that hole.
The threads in that fitting are some bizarre metric size. You can buy an adapter from Mike Forte so you can screw in a temp sensor. |
Thanks for the info!
|
| All times are GMT -7. The time now is 07:39 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: