Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Small Block Talk (http://www.clubcobra.com/forums/small-block-talk/)
-   -   How would you like a New Thermostat housing to be built? (http://www.clubcobra.com/forums/small-block-talk/95814-how-would-you-like-new-thermostat-housing-built.html)

jimf 03-26-2009 02:49 PM

How would you like a New Thermostat housing to be built?
 
If you had your ideal remote thermostat housing built, what sort of shape and porting would you like to see on it? How many people would like to have one of these? I have seen quite a few people trying to figure out an ideal one and if there is enough interest and a design can be agreed upon maybe I could make up the tooling and have them cast.

Jimv455 03-26-2009 03:20 PM

Jim, I'm not sure if I would go with the remote idea. If I was going to do a new design, what I think would be big hit was one that allowed you to use the big block fill tank, which is pretty common on your small block. The big differnce from what I've seen is the mounting pattern on the thermostate is reversed on the small blocks..

bobcowan 03-27-2009 04:13 AM

I would like one that makes a 90* turn straight up, with a radiator cap at the top, and the hose barb just below the cap that points straight foreward. You can get something similar for a Chevy, but not for a SBF.

sllib 03-27-2009 06:08 AM

Bob;
I bought what you're describing from CobraEarl. It turns 90 degrees up and then you bolt a SBC unit to that. I needed the extra height to get over my alt. belt. www.cobraearl.com.
Bill Stradtner

427 S/O 03-27-2009 06:45 AM

I didn't particularly like the original so I built this 90 degree filler/thermostat and also the remote reservoir.


http://i170.photobucket.com/albums/u...a41024x768.jpg

FUNFER2 03-27-2009 06:48 AM

I sand casted a new housing so my hose is a nice "s" shape to the radiator on the left size.

http://i43.tinypic.com/2urrod2.jpg


All times are GMT -7. The time now is 08:49 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: