|
Headers and side pipes
I am new to this forum and Cobra. I inherited a Butler with a 351 Winsor, T5 transmission and Ford rear end. Front suspension is rack and pinion with adjustable coil overs. Wilwood brakes all around. Can someone recommend a supplier for headers and side pipes? Thanks for your help. Been a real enjoyment and learning curve.
|
Quote:
|
Butlers are very nice cars!
For headers and side pipes check out Gas-N. They run an ad at the top of our forum pages just click the ad. Talk to them. They are easy guys to talk to. Their stuff is all stainless and not only looks like jewelry but the stainless will last forever. I don't think you'll find a Butler specific package if I remember correctly but they can easily make one up for you. Butlers have a high authenticity quotient so you should not have any significant problems finding stuff. Ed |
Quote:
|
Red Shark Engineering, in California. The original supplier to Shelby Americam in the 60's, still in business today.
|
Much appreciated help on headers and side pipes
Thank you all for your help. I appreciate any and all guidance on this. I have rebuilt vehicles before. I have completed a 1953 MG TD that was a basket case and gave it to her as an anniversary gift. I also rebuilt her Mom's 1972 Mercedes 350 SL and a 1971 Corvette convertible. But never have I had an opportunity like this. Thanks again.
Bob |
Vintage Wheels sells them and may have a set instock.
Since they're 17 miles from you, I'd ask if you could put a deposit on them so you could take them home for a test-fit. Vintage Wheels 14805 Fisher Cv Del Mar CA 92014 https://vintagewheelsus.com/index.ph...roducts_id=373 They say they'll fit a 90" WB Cobra and someone already commented on the thread the Butler was pretty true to form. Their headers and side pipes (raw) are a good deal. $1195 The Ceramic coating is a bit steep, add another $1250 for Silver But the price is inline with Jet-hot. My quote from last week was. $1750 w/out freight, For Silver headers and White Sidepipes. You can probably find a local vendor to do them all for $600-700. Or you could go with a Fab Company like these. https://www.gpheaders.com/products/cobra-kit-headers/ https://www.stainlessheaders.com/cobraheaders https://www.shellvalley.com/index.cf...=cat/cat35.htm |
| All times are GMT -7. The time now is 02:57 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: