02-07-2010, 06:18 AM
|
 |
Senior Club Cobra Member
|
|
|
Join Date: Jun 2007
Location: Covington,
wa
Cobra Make, Engine: Superformance # 532, 466 BB, 560HP
Posts: 3,031
|
|
Not Ranked
I had problems with mine dragging, and to eliminate that, I had to adjust the rod so that I was preloading the throw out bearing. Neither condition was acceptable in my opinion.
I had a 1 inch diameter slave cylinder, so took some 1 inch diameter stainless material I had in the garage and bored a 7/8 inch diameter sleeve to fit in the existing slave cylinder to get more stroke. Just got it completed yesterday and it works like a charm. No drag and no preload on the throw out bearing.
It does have a little more pedal pressure, but not that bad. I can live with it.
And sorry, I did not take any pictures while I was doing it. I have a spare slave cylinder here and I'm probably going to make up a spare in the next month or two. I will get pictures of that one if anyone is interested.
__________________
John Hall
|
Threaded Mode
