TKO600 shifter

[Ron61]

Mine has always been kind of notchy but has gotten a little better the longer I use it. My main problem is getting it into reverse at times. I have thought of trying a longer shift lever but after reading these posts I am not sure that would be worth the money.

Ron

[Chilibit]

I tried a well regarded short shifter and I concluded that the 'pace' of the stock shift lever was better suited to my TKO 600. It takes a bit more time to make the shift with a longer arm and that rhythm works very well. For me. Shift to first and then to reverse and it seldom hiccups.

[jacobsed]

And that’s how you do it because there is no synchro for reverse.

[Dwight]

Spend your money on a street upgrade for the 600. A shifter will not help that much.

There are several companies that sell the parts to upgrade a Tremec 600.
I used parts from Liberty Gears. They give you a list of parts to remove from your tranny and ship to them. They rework / replace the parts and ship back to you. I had a local Ford mechanic to do the work. Took about an hour to remove and 1 1/2 hrs to rebuild. What a great tranny! You could not miss a gear!

Bronze Shift Fork Pads
Surface Enhancement Processed Hubs & Sliders
Internal Shift Linkage Upgrade
Liberty’s Exclusive Threaded Front Cluster Bearing Support
Carbon Fiber Blocking Rings—2nd, 3rd & 4th Gear

Dwight

[FUNFER2]

Originally Posted by Dwight

Spend your money on a street upgrade for the 600. A shifter will not help that much.

There are several companies that sell the parts to upgrade a Tremec 600.
I used parts from Liberty Gears. They give you a list of parts to remove from your tranny and ship to them. They rework / replace the parts and ship back to you. I had a local Ford mechanic to do the work. Took about an hour to remove and 1 1/2 hrs to rebuild. What a great tranny! You could not miss a gear!

Bronze Shift Fork Pads
Surface Enhancement Processed Hubs & Sliders
Internal Shift Linkage Upgrade
Liberty’s Exclusive Threaded Front Cluster Bearing Support
Carbon Fiber Blocking Rings—2nd, 3rd & 4th Gear

Dwight

Dwight, how much was the total bill ?

[Dwight]

About three years ago I paid about $360 for parts and $200 labor.

Dwight

[FUNFER2]

Originally Posted by Dwight

About three years ago I paid about $360 for parts and $200 labor.

Dwight

Was it worth the money ?
How much better did the mods make, 1out of 10 ?

[FUNFER2]

Is there enough members here that have experience's of these most noted shifters for Tremec's, to have a poll on moet liked and why ?

I had a 3550 Tremec back in 2000 and worked well. Now with my new engine, clutch and trans build, I just bought a new 600 series and looking into a aftermarket shifter. I'd rather install a shifter onto the trans out of the car, to make better & easier adjustments before installing into the car.

What makes the Hurst so much more expensive than the rest, the name factor or better quality ?

Steeda
Pro 5
Hurst
Jordan
MGW