Door latch looseness (rattle) finally fixed

[tortuga]

Been screwing around with the latch, tape, angle etc.

Finally took the whole inner door panel off to see about maybe changing the door angle slightly, which I did, but also realized that all four hinge bolts are slotted fore and aft. Moved the whole door forward a whisker, and the latch is now tighter than a nun's punnany...

Really pretty easy.

Cheers
Steve H
1764

[Blas]

Here is another solution.
On the door striker there should be a stack of washers [usually 4 to 6], this stack of washers can be modified to adjust the striker sway from the door lock or closer to the door lock.
Thought I would pass this info on.
Blas

[tortuga]

I messed with the latch quite a bit, moving the door itself around was actually easier...