Inner fender rock proctection?

[cobra crazee]

ST, do you know the product number for the adhessive stuff from mcmaster's. THANKS

[Tom of VA]

the Kirkham guys are at this thread

While they don't have to worry about stars upon thars, they still get nice outty dents.
I bought some padding from The of the Hill. The coverage was much better than the stock SPF and the padding was thinker. It was pricy but saved me lots of time with the self sticking backing and there was no need to trim the pieces.

[xlr8or]

Originally Posted by Tom of VA

While they don't have to worry about stars upon thars, they still get nice outty dents.

No outty's here.
Kirkham offers the foam padding for the fenders. Uses a typical spray adhesive and is about 1/2" thick.

[Tony Aprile]

Bob

Any sporting goods store should sell the sleeping bag pad, I'll check Eastern Mountain sports here on the Island, if they have it I'll send it ya...

Tony

[Ant]

With all this neoprene and other glue in foam type protection, may retain water but should deflect stones etc!
What I have seen done with some kits is a double skin of fibreglass with a small gap between layers, this will add some weight, and will have to be thick enough to withstand a bit of punishment, and it could also be covered with an average coat of rubberised underseal!

I could get into the area of overkill here, the old KISS principle of keep it simple stupid applies, but I hate paint crazing due to stone damage!