Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Tech Tips (http://www.clubcobra.com/forums/tech-tips/)
-   -   Recommendations for some simple billet work? (http://www.clubcobra.com/forums/tech-tips/100253-recommendations-some-simple-billet-work.html)

Gunner 10-12-2009 04:57 PM
Recommendations for some simple billet work?
 
Can anyone recommend a shop (anywhere in the US) to turn out some simple billet aluminum work? Just a shaped breather flange out of 0.250 plate, maybe 10-25 copies after the prototype?

Thanks.

RodKnock 10-12-2009 05:01 PM
Quote:
Originally Posted by Gunner (Post 992788)
Can anyone recommend a shop (anywhere in the US) to turn out some simple billet aluminum work? Just a shaped breather flange out of 0.250 plate, maybe 10-25 copies after the prototype?

Thanks.
Uh, Kirkham?

Gunner 10-12-2009 05:08 PM
Quote:
Originally Posted by RodKnock (Post 992791)
Uh, Kirkham?
Who? :D

I wasn't aware they did custom work. Are their rates reasonable?

KarlCSX2498 10-12-2009 05:14 PM
Yeah, call EGW at 215 538 1012 they are located in the Philadelphia area and have done several custom billet CNC parts for my cobra build. nice guys and easy to work with. send me a PM if you need any more info.
later, karl

ccx1984 10-12-2009 05:42 PM
cnc billet machining
 
any cnc/machine shop can do what you want. there is a machine shop here that has cnc/water jet/ standard machie work. call HJM machine (504)733-1060 ask for Eric. they can also do sheetmetal work stainless and aluminum. there is a weleder there that has a nice 34 three winwow and a small block chevy trike.

mickmate 10-12-2009 06:08 PM
Like these http://www.actoncustom.com/Cobra_Parts.php

tcrist 10-12-2009 07:25 PM
Gunner,
You have a PM.
Terry

FWB 10-12-2009 08:10 PM
i do all types of machining,

http://www.origincorp.net/

fred

RodgerH 10-13-2009 06:15 AM
Someone here had used and recommended this company. Looked interesting; I kept the link.

http://www.emachineshop.com/

Rodger


All times are GMT -7. The time now is 10:28 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: