Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Tech Tips (http://www.clubcobra.com/forums/tech-tips/)
-   -   carburator fire (http://www.clubcobra.com/forums/tech-tips/124365-carburator-fire.html)

norbert79 12-03-2013 04:06 PM

carburator fire
 
hi, i have this problem. my car run good, but last week i went to start and it didn't start. it make some fire from carburator and don't start. engine is 351w stroke 393 and caruburator is a demon. Regards

vector1 12-03-2013 04:25 PM

sometimes they'll do that, if you have the cleaner off make sure you have a shirt or rag handy to smother the fire. if it hasn't been started before, make sure you have enough ignition advance.

as long as it didn't look like this, you're still in the ballgame.

Video Working on an Engine Fail - YouTube

Ron61 12-04-2013 07:17 AM

If it ran good last week, did you make any adjustments or do anything to the carburetor or timing? Did it backfire when the fire started?

Ron :confused:

D-CEL 12-04-2013 08:57 AM

You might want to check the ignition advance mechanism and make sure its not stuck in the advanced position

Jason

norbert79 12-07-2013 09:25 AM

ok thank. this week i try to see the ignition.

ciao a tutti

jhv48 12-07-2013 09:52 AM

That's why they're called Demons. They breathe fire.

I know, I know, not helping.

norbert79 12-28-2013 10:42 AM

hi guy,
today i repair my car. i change the demon carburator with holley carburator 750cfm. the car start but it is to early because the exhaust pipes became red. i try with stroboscopic gun and the engine run at 3000rpm about 18 degree, is correct?

thank a lot
Ciao da Norberto

marco454v8 12-28-2013 10:54 AM

Hi Norberto, you should be between 36-40 deg at 3k rpm!

Mark

norbert79 12-28-2013 11:06 AM

Hi Mark,
ok i can try. now with these carburator the minimu rpm is 800/900rpm. how many deg at 800rpm?
Norberto

ERA Chas 12-28-2013 12:04 PM

Between 12 and 14 degrees at about 1000 rpm.

norbert79 12-30-2013 10:48 AM

ok thanks a lot. i will can try

regards,

Bernica 12-30-2013 11:14 AM

Mechanical or vacuum advance on the distributor? Either way, sounds like something is stuck and not allowing it to advance as it should. The numbers in the posts above should be pretty close to what you want.

LMH 12-30-2013 11:35 AM

When I was a kid, I was at our local drag strip and saw a car catch fire. Flames were coming out of the hood scoop. One of the mechanics stuck his bare hand in the scoop to smother the carb. I guess his hand was less important than the carb.
His dedication kind of impressed me.
Larry


All times are GMT -7. The time now is 04:44 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: