-
Tech Tips
(
http://www.clubcobra.com/forums/tech-tips/)
| saltshaker |
10-23-2007 03:23 PM |
your best cam choice for a fe
what has been your best cam choice for your fe? I'm building a 428 .40 over with c4 heads ported with cj valves , 10.4 comp and a c3 2x4 intake with 600 holleys (vac)...so what cam did you like best in your 428 fe power'd cobra?
|
| Jerry Clayton |
10-26-2007 07:08 AM |
Ford had an factory cam for the 428cj racers in 68 that was hyd flat tappet
C8AE 6250-D (memory???) ran real good even on street
|
| Excaliber |
10-26-2007 07:32 AM |
|
| blykins |
10-26-2007 08:20 AM |
Where do you want the power to be? Up top or down low? Do you want to install it and forget it, or do you want to run valves once in awhile?
|
| Excaliber |
10-26-2007 09:20 AM |
Dial in the cam for your estimated cruise rpm, thats what I did. Otherwise the engine is not happy and MOST of your driving IS cruising!
|
| All times are GMT -7. The time now is 07:14 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
