|
Aluminum 302 block
I am currently building an aluminum 302 for my Cobra project. The block I am using is a Ford Motorsport block built by RDI for ford. These block were used in the 24 hours at daytona race some years ago and they are really nice pieces.
I have another block if someone is interested in building an aluminum block small block for their project. The block I have is a 4.061 bore currently but can be bored to 4.155. 4 bolt main front to back (not just the center three) external oil pump is required, and this block has been line bored to fit roller cam bearings. It does fit stock small block bellhousing pattern and stock timing chain cover. This block is a really nice peice and allows for quite a bit of h.p. with alot less weight. We currently run of these blocks with a set of yates heads,347 stroke in our dragster. We never have dynoed the motor but she'll run 7.90's in a 224" rail. This block new is $3800.00 bare casting. by the time you add the machine work on the lifter bores, cam bore, etc. it will put you some where in the ballpark of $4800.00 to $5000.00 I'll let this one go for $2200.00 or o.b.o. If you have any questions drop me a line or call Gene Schach 956-533-1205 |
Can you tell me the block weight with caps on.
Thanks |
90 to 95 lbs with the caps.
|
I posted a few pics of my block in the member galleries area. The block is in the car so they arent really that good of pics, but its the same as the block i have for sale.
Gene |
| All times are GMT -7. The time now is 02:48 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: