Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Texas Cobra Club (http://www.clubcobra.com/forums/texas-cobra-club/)
-   -   New Coupe Kit Owner! (http://www.clubcobra.com/forums/texas-cobra-club/115513-new-coupe-kit-owner.html)

Stoney FFR 05-09-2012 08:18 AM

New Coupe Kit Owner!
 
Looks like I'm going to be the owner of a new FFR Coupe kit, unless the deal falls through! I'm headed to North Carolina on Saturday to pick it up.

Has anyone ever purchased a kit from out of state before from a private individual? I'm planning to get the original Factory Five Certificate of Origin (with the Seller's name listed) and a notorized Bill of Sale. Should that be sufficient?

Oh yeah, did I mention that I'm going to be the owner of a FFR Coupe kit?!! WOOOHOOOO!!**)

Bwana Snake 05-09-2012 08:50 AM

Congratulations Joe now we have three new coups coming on stream.

snakebittexan 05-09-2012 11:05 AM

Good luck and can't wait to see her finished!

dallas_ 05-09-2012 12:05 PM

Joe, I thought of you when I saw that posted. :D

Smokin good deal.

Keep us posted.

Gregg(What's his name)? 05-09-2012 12:56 PM

Sweet

Stoney FFR 05-09-2012 01:41 PM

Quote:

Originally Posted by dallas_ (Post 1189509)
Joe, I thought of you when I saw that posted. :D

Smokin good deal.

Keep us posted.

Nawww.. It was never posted.. Someone that saw my WANTED post contacted me through PM's..

G_Edmonds 05-09-2012 01:53 PM

Congrats Joe! Hope everything goes smooth.

am9648 05-09-2012 05:50 PM

FFR Coupe
 
Check out HB-890 Texas Street Rod and Custom Vehicle Bill for registration process.

RTB 004-12 Custom Vehicle and Street Rod Program

VTR-852.

Street.Rod.Custom.Vehicle.FAQ

am

airspeed1 05-09-2012 09:31 PM

Joe:

Allllllllllrrrrrrrighttty! That is great news. Is the kit partially complete or in the box?

My kit is getting completed and boxed up on Saturday. It is supposed to be on the truck next week. Mike's follows in about two weeks.

Hey...can you get two kits in a your trailer. If so, I need you to swing on up to Wareham, Mass!

All kidding aside, this is going to be great fun.

Gary...We need you and Francis to jump on in...the water's fine.

Jerry

Stoney FFR 05-10-2012 05:35 AM

Quote:

Originally Posted by airspeed1 (Post 1189566)
Joe:

Allllllllllrrrrrrrighttty! That is great news. Is the kit partially complete in the box?

My kit is getting completed and boxed up on Saturday. It is supposed to be on the truck next week. Mike's follows in about two weeks.

Hey...can you get two kits in a your trailer. If so, I need you to swing on up to Wareham, Mass!

All kidding aside, this is going to be great fun.

Gary...We need you and Francis to jump on in...the water's fine.

Jerry

Looking forward to it, although I may be a little slower than you guys getting it together. It's a base kit. The kit is a new generation Coupe (red body) and the only thing he has done is bolted on the steering rack and front LCAs. So yeah, basically starting from scratch.

Anybody have an 8.8 rear end laying around? :) Right now I'm trying to decide if I'm going to use another donor or source parts individually.. Fun fun!

LREYBURN 05-10-2012 08:16 AM

There's beauty in the beast!
 
http://www.clubcobra.com/photopost/d...mbs/Q-_093.jpg Hurrah! The more the merrier. I would strongly suggest that one installs A/C for comfort and spousal endorsement. One word of caution...Check with Jay regarding the problems he encountered buying a Coupe after it sat without a buck....The fiberglass warped creating a real build challenge.

Stoney FFR 05-10-2012 08:53 AM

Thanks! I'm planning for it to have A/C, Heat, PB, PS; that much I do know. I'll use a buck to store the body. Wish I still had my body buck from the Roadster.

Stoney FFR 05-10-2012 09:01 AM

Quote:

Originally Posted by am9648 (Post 1189539)
Check out HB-890 Texas Street Rod and Custom Vehicle Bill for registration process.

RTB 004-12 Custom Vehicle and Street Rod Program

VTR-852.

Street.Rod.Custom.Vehicle.FAQ

am

Not finding any details about a Manufacturer Certificate of Origin issued to another person from another state and the requirements of Texas in order for me to get it titled here.. Headed to the county sub-courthouse in a few.. Guess I'll find out.. Thanks

airspeed1 05-10-2012 09:32 AM

Joe...we may need to have a buck building party. I am concerned about letting the body sit is a hot (west facing) garage at the lake house. It gets very hot in there and that concerns me. I have not seen much about Coupe body buck on line. They mainly mention cutting two boards to a certain length an placing them like an upside down V under the roof.

Jerry

Don Gentry 05-10-2012 11:34 AM

I think matt mc may still have his buck let me drop him a note.
Congrats Joe....and Jerry! Are you guys sticking to the 302 carb or are you guys add sc or turbo's, or going bigger?

airspeed1 05-10-2012 12:18 PM

Don:

I am going with a 351/400hp carbed from Engine Factory. My brother (whose kit is headed this way in two weeks) is doing the same.

Jerry

Stoney FFR 05-10-2012 01:38 PM

Quote:

Originally Posted by airspeed1 (Post 1189622)
Joe...we may need to have a buck building party.

Sounds good Jerry! Let's do it.. Here's one version, but I'm not sure I like it that high. http://www.carrollclan.com/FFR/BODYBUCK/index.html

I'll probably leave mine outside too. Between the Cobra, Coupe, Motorcycle, Motorcycle Trailer and Cheryl's Acura I think I have just about ran out of room in the garage.

Stoney FFR 05-10-2012 01:41 PM

Quote:

Originally Posted by airspeed1 (Post 1189640)
Don:

I am going with a 351/400hp carbed from Engine Factory. My brother (whose kit is headed this way in two weeks) is doing the same.

Jerry


Well mine is going to be 401hp. :D

jayscobras 05-10-2012 02:18 PM

Let me think
 
You may want to do some research. Using the 351 in my coupe, we had to alter the hood scoop area due to deck height. It is worth questioning. Congrats.

Jay

airspeed1 05-10-2012 07:46 PM

Jay:

That is good advice. I will do some digging on this.

Jerry


All times are GMT -7. The time now is 08:11 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: