|
Holley Tune up expert needed.
I need to set the timing on my cobra and set the 650 DP this weekend. Anyone good at doing this? The primary float must be set way too high? My throat was burning from a recent drive as I smelled raw fuel. The primary float screw has these stupid paper washers and the fuel was so high in the primary that the washers were dissenigrated and fuel was dripping onto the manifold !
Guess I just need a good carb tweaking. Volunteers for this weekend or advice? Regards, |
Glad to Help!
Hey Dave you know me glad to help!:3DSMILE: :3DSMILE:
Just give me a wrench. Did you get the gaskets for the Float adjuster? Gregg H |
Are You Guy On for this weekend?
Stretch and Joe (per Stretch) may come up this weekend to help tweek the beast. Mustang Mendez said he would come up either Saturday afternoon or Sunday.
I'll have the intake gaskets, tonight. I'm also going to need to set up the distributor and adjust the floats on the carb. Let's get some Cobra's to the house. Are You Guy On for this weekend? Of course I have Homebrew! What a silly question! |
Might Make SUnday Afternoon!
Ren,
Might be able to help Sunday Afternoon. Have to work on Saturday. But other wise Sunday might be do able. Gregg H |
Ren Man
Sunday would be best for me also sometime after 1:00 pm Here are the no.s for your carb kit Holley 37-1544 The power valve saver is (brand) Spectre p/n 2408 I have one here in stock if you cant find one I can also get the kit if you need me to also .Dont forget some carb cleaner . Talked to Cobra Dude and he can come by on Sunday So thats 3 with Greg . Oh yeah we need some easy direction to your place . Comining in from the south 183 that is . Mustang Mendez :MECOOL: |
Hey Renman,
I know very little about carbs (except that I eat too much of them :) ), but I can help you with almost anything else -- intake gasket swap, etc. Sat or Sun works for me, so let the others decide. Let me know if you need any tools or liquids as well -- torque wrench, RTV, thread sealant, etc. 512-799-2645. Cheers, -Neil. |
Sunday is a Go!
Sunday at 1pm sounds like a winner.
I have the Holley parts coming in. Someone bring a timing light? Only thing I can't seem to get is the stupid felt washers for the nut and screw that adjust the float height. I'm at 303 River Ridge Dr. in Georgetown. From whereever you are coming (Tony take 183 N. to I-35 North) Take I-35 North to exit #260, Leander Rd. (2243). Cross over the highway heading West. Go 1 Mile, you'll pass a Middle School on your Right. The road will narrow to one lane in each direction. There are three entrances to the River Ridge Subdivision. Take the third entrance. This is River Ridge Dr. and you can only turn right. This street has a divided grassy median. Proceed straight ahead, go through the first stop sign. I am on the left side of the street, White Brick Single Story Home 303 River Ridge Dr. My cell ph. is 512-633-7373 if you get in a bind. See you all on Sunday. Thanks! |
Ok
The Carb kit will have the washers in a small plastic bag . I will bring some left over gaskets . Lets see Greg can bring the BBQ And Cobra Dude can bring the rest for picking on me for the last week HEE :CRY: Then I will much better as you can tell I like to eat .... Mustang Mendez |
I'll bring the timing light.
|
I'll bring the COOLANT!!!:p :p :p :rolleyes: :rolleyes:
|
BBQ?
Hey Guys,
Don't fully count me at 1pm. I'm working until about 12 on Sunday and I will be coming up straight from work so I be as close to 1 as I can get. Hope to just be able to get there in a timely fashion. Gregg H |
| All times are GMT -7. The time now is 11:55 PM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: