- -
Brake Lines
(
http://www.clubcobra.com/forums/texas-cobra-club/19624-brake-lines.html)
| fubar |
08-21-2002 01:48 PM |
Brake Lines
I just brought some new brakes for my Cobra, but they have a different fitting than my old ones and I can't find anyone wo will make brake lines. Can anybody recomend a place to get brake lines made.
I'm in Dallas.
|
| Jack21 |
08-21-2002 02:53 PM |
Do you need flexible lines for the caliper, or steel lines for the body?
|
| fubar |
08-21-2002 03:00 PM |
I need the flexible line for the caliper. Nobody around here will make them bacause of the liability.
|
| kountzecobra |
08-21-2002 05:13 PM |
Speedway motors sells pre-made #3 S/S lines, but you will need to figure out which adapter fittings you will need. Most inverted flare fittings on calipers are the same thread as National Fine Thread bolts. You can go to parts house and buy an assortment of fine thread bolts and see which will screw into caliper to determine whicn adapter fittings you will need. Then there are pipe threads, but very few calipers use pipe threads. Banjo bolt type fittings are used sometimes, but be sure to use copper washers with them. Just remember to check for leaks. Later, David Shelton.
|
| jayscobras |
08-21-2002 05:33 PM |
call me
gimme a cal at 972-742-2594 and we will sort this out.:D
jay
|
| fubar |
08-21-2002 06:16 PM |
I think I have it solved. There is a company outa Mich. that claimes to have what I need. I appreciate the help and if this fails I'll be giving you a call shortly.
|
| All times are GMT -7. The time now is 08:09 AM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
