![]() |
Who is planning on the Wednesday meet and greet June 11???
Please let me know who is planning to attend the "Happy Hours" at Buzz's house next Wednesday so we can plan on the right amount of food and STUFF? Some of the local wifes and girlfriends are helping Buzz with the preparation so the wimmen want to know HOW MANY to count on being there?
Here are the directions: From the South parking lot of the Marriot go East to South Lewis and proceed south one mile to 81st street (intersection of ORU and WalMart) then turn Left and proceed East for 1 mile to Harvard and continue thru the intersection to the top of the hill (about 300 yards) turning left at the first street http://www.clubcobra.com/photopost/d...oogle_map_.jpg |
Clois,
That looks to be about three turns too many for Steve.:) |
You are probably right especially going back to the hotel.
|
well if 3 turns are too many...just go east on 71st street and turn right (south) on Pittsburg and stay on that which meanders through the neighborhood and comes to my house. after turning south on Pittsburg, go straight through the 3 way stop...then straight through the 4 way stop and them you will see my house a little ways down with the street sign of 80th and Louisville in my front yard. THERE...only 1 turn!
3709 East 80th Street |
I'll be there. See ya on Wednedsay.
John |
Fred & Clois,
If you're referring to my wandering adventures last year........I STILL blame Clois for last years telephone directions!!! I'm a BIG maybe, for everything. The Mustang is still in pieces, and I'm working feverishly to get it back together. All electrical issues. I've got a short somewhere which shuts the ignition down when I turn left. And it's not in the practical location. The builder used the original wiring harness, which leaves about 75% of the wiring unused. So I'm slowly removing wire circuit by circuit, and testing the required active ones each pass. And of coarse, something has to break periodical. Pretty labor intensive. Especially for a novice. Put me down for one, hopefully. I'll print the directions this time. |
Quote:
I really don't see me making it on Saturday as I don't want to make my wife bring me. She doesn't really want to come, and I don't want to force Cobras on her, that will just make it harder to get one when the time comes. This walking boot just makes it so hard to drive a clutch. |
I'll be riding up with John Ross on Wednesday ,So please count me in at Buzz's.This is my first time at Tulsa. Hopefully by this time next year I'll up there with a new Hurricane. Can't wait to meet everyone and check out their rides, looks like it's gonna be one big party! Joe
|
James and boys will be there, and my friend Melvin and son. We will see you guys there sometime around 6:00...
Bests, James |
| All times are GMT -7. The time now is 09:46 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: