|
need new Hyd Slave & bracket
I remember seeing a few people on here selling hyd slaves and brackets but cant seem to remember who they were. Im hoping the title gets them to come in, you can reach me at maxum_101@hotmail.com I got an issue with my slave internal spring and the bracket I have does not line up the slave to the fork too straight.
thanks |
It would help if we knew your current clutch, bellhousing and transmission setup.
|
sorry
351W with a tko 600 stock bell housing centerforce clutch |
This is a nice push style unit from GCP . http://www.gcperf.com/gcpcstore.html Also check out DazeCars http://dazed.home.bresnan.net/test#4
|
Here's a link to a thread with some good pics of the GC Perf part.
http://www.clubcobra.com/forums/show...h+slave+master |
thanks for all the replys
I have a picture of my set up now in my profile, u can see how the shaft is not straight. and also theres an internal spring in the slave that keeps putting pressure on the PP GOT THE BUG...I have that bracket in that link you posted, great piece, it just dose not let me adjust it to make the slave push the rod straight, its not in the same plane I have a 7/8 slave now, anyone change their set up to something else? any photos? |
Does your bracket have slots in it where it bolts to the bell housing? Have you tried loosening the bolts and sliding the bracket out a bit?
|
Quote:
|
Bob in Ct
I'm sure I remember Bob in Ct posting on this issue with SPF cars pretty extensively, complete with a solution. You might want to shoot him a PM.
|
|
Hi maxum!
Have absolutely the same problem with my setup. By the way...like the new look of your engine a lot!!!! What a difference between before and now! Peter |
Quote:
|
Yup!
Bob |
Is there enough room to modify your bracket? You could take a round file and just elongate the slots a bit. Or even slot your bracket all of the way so the edge is open. That way you will know the dimensions you will need on the new bracket if indeed you will still need one after that.
Just a thought, |
I'm using the same one from Greater Cincinatti Performance. Some minor adjustments needed to be made, however it works well.
-Mark |
| All times are GMT -7. The time now is 03:04 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: