Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Transmission Talk (http://www.clubcobra.com/forums/transmission-talk/)
-   -   TREMEC for BBF w/ SHORT INPUT (http://www.clubcobra.com/forums/transmission-talk/64774-tremec-bbf-w-short-input.html)

kitcarbp 05-26-2005 09:16 PM
TREMEC for BBF w/ SHORT INPUT
 
OK, I have been trying to find out which supplier can set me up with a TKO 500/600 set up for a BBF (460) with the correct length short input shaft (about 6.5 inches I think) , I don't want to use the spacer that is available as the solution. Who has experience with a good TREMEC distributor that you an recommend from experience ??? Does TREMEC build one to this spec with the short input as a special order or do the TREMEC distributors do the mod themselves and swap out the input ? I am sure one of you have already tried this path ??

Thanks

Bill:confused:

Rebel1 05-27-2005 06:47 AM
Yep...these folks will sell you what you want.

http://www.fortesparts.com/fordtremec.html

Burgs 05-27-2005 01:44 PM
Quote:
Originally posted by Rebel1


Yep...these folks will sell you what you want.

http://www.fortesparts.com/fordtremec.html
I actually changed my mind from SBF to BBF after I purchased a TKO600 from Mike Forte. He sent me the new shortened shaft and walked me thru the process of changing it out, which was pretty easy, and he left me his cell number to contact him if I needed help in the middle of the swap. He did not bill me for the shorter shaft, but simply asked me to send the long one back to him, and included a prepaid UPS shipping lable for the return trip. Pretty good customer service if you ask me! ;)


All times are GMT -7. The time now is 10:38 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: