Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Transmission Talk (http://www.clubcobra.com/forums/transmission-talk/)
-   -   Transmission Info ? (http://www.clubcobra.com/forums/transmission-talk/72476-transmission-info.html)

BBRONKO 09-04-2006 02:06 AM

Transmission Info ?
 
Hello Everyone ,

I am new here and come here seeking some trans information . I have a 4 speed top loader trans and I am trying to find out what it came out of . There are several places on the web and not all the info is the same . I have looked here for info . http://www.5speeds.com/toploader.html#tag , http://www.davidkeetoploaders.com/ , http://www.woodyg.com/fairlane/finfo/toploader5.html . The tag on the trans I have says HEH CC . Two of the three places say it is a 1965 AC Cobra 427 close ratio trans . Is this info correct ? If anyone has more info on this topic please let me know . Thank you .

Frank

trularin 09-04-2006 07:17 AM

You went to David's site and could not identify a toploader????? Hmmm......

May I suggest an email to David asking for information. He is the top guy for Toploaders.

Just my $0.02

Anthony 09-04-2006 08:11 AM

390 galaxie wide ratio

http://www.davidkeetoploaders.com/idchart1.htm

I believe all 427 cobra's came with big input splines. I would guess that a galaxie 390 tranny would be small spline. Is it big or small input ?

BBRONKO 09-04-2006 12:49 PM

Hello Trularin ,

I did look at David's site but the info there is not the same as the other sites . The reason I came here is to find out the true car this trans came out of .

Hello Anthony ,

Can you give me a way to find out if it is a big or small input splines shaft .


Thank you
Frank

trularin 09-04-2006 02:15 PM

Hmm.... that might cause some problems. Did you email David?

:D

Anthony 09-04-2006 04:58 PM

Quote:

Originally Posted by BBRONKO
Can you give me a way to find out if it is a big or small input splines shaft .

The small input shaft is 1 1/8" in diameter, while the big input shaft is 1 3/8".

Some of the early 427 cobra's came with big input and small output trannys, so if the rear spline count is 28, it could be either. Big output spline count is 31.

BBRONKO 09-05-2006 12:22 PM

Hello ,

Thank you for all the help . I did e-mail david on Monday . I have not gotten a reply yet . Thanks again for the help .

Frank

BBRONKO 09-07-2006 11:58 AM

Hello ,

Does anyone know how long it takes for David to reply to emails sent to him ? I remember someone here saying in another topic that he never replys to emails . As of now I do not have a reply from him . Thanks .

Frank


All times are GMT -7. The time now is 03:18 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: