Turnkey built from A to Z!! - Page 5

mbelan2 · #81 (**permalink**) 10-13-2008, 07:08 PM

Nice pics. It's extremely helpful being able to review and gain insight from someone elses build. I'm completing my first build also and the pics from this site are priceless. Where did you locate the headers for your BB and how is the footbox clearance on the drivers side?

ddcobra · #82 (**permalink**) 10-14-2008, 08:21 AM

Marc nice pics on your gallery

Hawkeye · #83 (**permalink**) 10-18-2008, 04:15 PM

Marc, my big block headers came with the kit from Don, but I believe he got them from Hooker. I had a little fitmit problem with the drivers side in regards to clearances to the body but not with the foot box. There is about 3/4" - 1" clearance. I am placing a heat shield between the headers and the footbox you can see part of it where it goes over the master cylinders in my photo gallery. I wanted to shield them from as much heat as I can. The passenger side had so much room I widen the passenger footbox by 2".

I notice you have one of Don's newer versions of the EVO. Pretty nice when it comes with some of the newer added touches like places to mount brakelines etc. Enjoy your build, I certainly am enjoying mine.

michel schryer · #84 (**permalink**) 10-18-2008, 06:43 PM

Hi guys,i've been doing some work on my D&D this summer and i will try to upload some photos shortly,just didn't know how to do it but Don told me how so i will try,i still have some pictures in my camera to download. My engine and tranny are in and i'm working on the electrical right now,it's messy but i will shorten the wires eventually. Still waiting for a few parts from Don. Hope to get the engine running next summer if i have my headers.

Hawkeye · #85 (**permalink**) 12-01-2008, 09:42 AM

Hey Don, any picture updates???????

TINNMANN · #86 (**permalink**) 12-01-2008, 02:32 PM

Don I have some pics in the gallery. Michel how is the build coming?
Cheers Greg

ddcobra · #87 (**permalink**) 12-01-2008, 07:04 PM

I will post tomorrow i have some photos for you guys!

Thanks Don,

FritoBandito · #88 (**permalink**) 12-10-2008, 02:27 AM

Quote:

Originally Posted by ddcobra

I will post tomorrow i have some photos for you guys!

Thanks Don,

Any updates on those photos?

ddcobra · #89 (**permalink**) 12-11-2008, 12:48 PM

ATTENTION New Address:

DD Cobra
1340, rue Principale Route 223
Ile-Aux-Noix , Quebec
J0J 1G0
Tel:450-291-5803
01/01/2009

ddcobra · #90 (**permalink**) 12-12-2008, 03:25 PM

The shop will be close From 12 to 22 Dec. we are moving in the new facility.
Don,

michel schryer · #91 (**permalink**) 12-13-2008, 05:04 PM

Hi Greg,Just came back from the Dominican Republic (not to piss anybody off)and I will try to put some pictures during my christmas holiday.
My build is progressing slow 'cause i'm a perfectionnist and i'm working when I feel like it and now it's too cold. I hate winter.
I got the engine and tranny in,brakes done wiring the dash and all my wiring is laid out,mostly connected. I keep repositioning stuff as i go, have to redo my console,didn't like the look of the padding,i'm still experimenting with that stuff,never done it before so it's consumming my progress. I'm relocating the battery so have to redo the batt. cable lenght bla! bla !bla ! I figure at the pace i'm going(which is slow) and i'm still awaiting parts from Don,will take me another summer. I am determined to get this puppy running this summer if i get my parts from Don (oops did i repeat myself here) paint the year after. Merry Christmas to all the Cobra guys.

Quote:

Originally Posted by TINNMANN

Don I have some pics in the gallery. Michel how is the build coming?
Cheers Greg

Hawkeye · #92 (**permalink**) 12-14-2008, 01:08 PM

Michel, do you have any pictures to post on your progress?

Yes I know it's not politically correct, but a Merry Christmas to all and a very healthy New Year.

michel schryer · #93 (**permalink**) 12-14-2008, 02:32 PM

Hawkeye,i do have pictures but i'm slow putting them on. I took some this summer but i did some progress after and i have yet to take those pictures. I will try to post some during my holiday.
Eventhough i don't celebrate christmas anymore, it still called merry christmas here in canada for us true canadians. Cheers and Merry Christmas.

rdg · #94 (**permalink**) 12-21-2008, 07:22 AM

Quote:

Originally Posted by Hawkeye

Herc, you are more than welcome to come and see my D&D kit and I live in Langley which is a little closer than Montreal. Let me know and I will get you a phone number.

Hi Hawkeye,
I'm looking at a build soon. Would you contact me so I can view your kit please. I live in White Rock.
Thanks
Bob

ddcobra · #95 (**permalink**) 12-21-2008, 03:33 PM

I'm back i will keep you up to date !
Monday i will post photos!!
Don,

michel schryer · #96 (**permalink**) 12-24-2008, 03:10 PM

I tried to upload pictures of my build but when i put all the pictures available to upload and when i presed the "Upload your photos" option,i loose the web page all the time,when i come back,nothing has been uploaded,what's the deal,am i missing a step? Am i putting too many pictures? Thanks for any help

Michel

ddcobra · #97 (**permalink**) 12-25-2008, 07:37 AM

Merry Christmas and a Happy New Year
Don,

Hawkeye · #98 (**permalink**) 12-25-2008, 08:39 AM

The same to you Don, and hope you have a successful New Year.

michel schryer · #99 (**permalink**) 12-27-2008, 03:42 PM

Salut Donald,

I wish you good luck with the new shop and do you think you can send the rest of my parts soon,i want to get this out of the way so i can concentrate on some other stuff,it's been a while since i heard from you,let me know please,thanks

michel

ddcobra · #**100** (**permalink**) 12-28-2008, 02:20 PM

Salut Michel,
I will send your stuff this week
Thanks Don,