|
Calling All Weber IDA experts
I purchased my Webers second hand and noticed that the Aux. Venturi were cut to the height of the carb body. I have no idea why this was done. Some say that it my be to fit an aircleaner on the carb :JEKYLHYDE
I would like to find out if it is worth me purchasing new Aux. Venturis which are pretty expensive for all 8. I have been running into some qurks with the Weber set but nothing that everybody else has not expierenced already. I have tried the standard setup with plus or minus values Standard setup 37 choke 120 air holders 55 - 65 idle jet F7 emulsion tube 210 air corrector 165 main jet 55 bleed Pump bypass Timing at 38 degrees at 3000 rpm fuel pressure 2.5 - 3 psi Will the cutting of the Venturi change the carb setup?**) |
| All times are GMT -7. The time now is 08:26 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: