-
Weber Tuning
(
http://www.clubcobra.com/forums/weber-tuning/)
| Rick Parker |
10-14-2007 01:09 PM |
58 mm IDA's on a 289
|
| Jac Mac |
10-14-2007 02:37 PM |
Are you sure Rick, Where is the center bolt on the outside of the rocker cover, Might be an -Olds, Buick, Rover Alloy V8 in possibly one of Reventlows Scarabs if that is the case. At least they had the right size carbs if they were 58's.Two center carbs are close together to match that port configuration.
Jac Mac
|
| Rick Parker |
10-14-2007 09:05 PM |
Jac Mac..........Your point is well taken. I think you're right. It does (after closer inspection) appear to be a Rover/Buick or Olds and they are probably 48's. My mistake. When I saw them mounted sideways I thought it was an Indy type Ford 255 pushrod motor. I guess I should look a little closer next time. DUH!
|
| Rick 427 Cobra |
10-14-2007 09:16 PM |
Never mind the carbs, what about that fool on the front?!!
|
| LoBelly |
10-14-2007 09:37 PM |
This is the trouble with modern technology
It has put the average camera-man out of a job when it comes to the 'in car' footage. :(
LoBelly
|
| Rick Parker |
10-14-2007 09:51 PM |
The ropes are there to keep his BALLS from dragging on the ground!
|
| 427 S/O |
10-25-2007 04:48 PM |
Many years ago, I happen to see a set of 58MM webbers (so he said) on a FE intake, The owner sold them to some guy in switzerland for 6K. I guess they came of a cobra?.
Just curious, after all the troubles I've read about tuning, is it that hard to get them right?
|
| Rick 427 Cobra |
10-25-2007 09:53 PM |
Yes , and anything you buy to try, is times 8!!
|
I see 'albanycobra' has asked a question regarding 44 webers for a 302 efi motor he has. Would the webers he is thinking of buying be to small for his set up...:confused:
|
| All times are GMT -7. The time now is 02:05 PM. |
|
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link:
