Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   Cam selection (http://www.clubcobra.com/forums/weber-tuning/94867-cam-selection.html)

onefastmustang 02-17-2009 05:43 PM
Cam selection
 
So Keith Craft recommended a 230/236 at .050 on a 112 lobe for my motor with the webers. I am sure this will run great coming from Keith. But my question is if at some point I want to pull my webers and put my 650 4 barrel back on am I going to be able to?? Or is this thing going to be a nightmare? :LOL:

blykins 02-17-2009 05:54 PM
No nightmare at all, but depending on what size engine it is, it may be mild mannered.

What size engine is it going in?

onefastmustang 02-17-2009 06:36 PM
Its a 392 sb.

blykins 02-17-2009 06:38 PM
It should be great with that size engine on a street application. It should make peak hp at around 5500-5600. The wide LSA will tame it down quite a bit....less overlap, more vacuum, etc.

If you'll notice, Comp's line of XFI cams (which work well with SBF strokers) have a wide LSA as well. This is good for fuel injected cars that have knock sensors, but different articles have shown that the strokers really like them.

onefastmustang 02-18-2009 08:46 AM
Quote:
Originally Posted by blykins (Post 922027)
It should be great with that size engine on a street application. It should make peak hp at around 5500-5600. The wide LSA will tame it down quite a bit....less overlap, more vacuum, etc.

If you'll notice, Comp's line of XFI cams (which work well with SBF strokers) have a wide LSA as well. This is good for fuel injected cars that have knock sensors, but different articles have shown that the strokers really like them.
Cool.. Thanks.. I am calling Keith today and ordering.


All times are GMT -7. The time now is 05:39 PM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: