Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   Best 48 IDA Intake for 302 with thermostat housing (http://www.clubcobra.com/forums/weber-tuning/95163-best-48-ida-intake-302-thermostat-housing.html)

markha 03-03-2009 01:06 PM
Best 48 IDA Intake for 302 with thermostat housing
 
I need some help. I am new to the IDA. I have over the last few weeks been able to acquire three of the four good 48 IDAs that I will need, but need to get an intake and linkage. I have a 302 that is now a 347. I want an intake that has the thermostat housing cast on it.

So I have three questions.

1. Who's intake for the 302 with thermo housing is the best and allows for linkage... Blue Thunder or... ?

2. Who's linkage should I use?

3. Who should I go to to buy the intake and linkage?

Thank you in advance for the help!
Mark

B.M.B.C 03-03-2009 01:20 PM
www.piercemanifolds.com
Hope this helps.

markha 03-03-2009 01:33 PM
Quote:
Originally Posted by B.M.B.C (Post 926228)
www.piercemanifolds.com
Hope this helps.
It looks like their linkage kit is a stand alone kit and does not attach to the manifold anywhere but at the carb mounting locations. Is this the best way to do it? I have also seen others that have a threaded boss in the center of the manifold.

bobcowan 03-03-2009 02:00 PM
This is exactly what you're looking for. It has the boss for the central throttle linkage, like the originals. It even has vacuum passages cast it.

http://verycoolparts.com/Stack.htm

markha 03-03-2009 02:42 PM
Quote:
Originally Posted by bobcowan (Post 926241)
This is exactly what you're looking for. It has the boss for the central throttle linkage, like the originals. It even has vacuum passages cast it.

http://verycoolparts.com/Stack.htm
That one says that it is for EFI. Their carb manifold for the 302 does not look like it has that boss or the vacuum passages.

http://verycoolparts.com/weber.htm

bobcowan 03-03-2009 04:33 PM
Should be the same. The stack EFI systems are built to emulate the webers. I'm using a carb manifold from Blue Oval with my EFI system. Call wayne and ask him.

markha 03-03-2009 04:39 PM
Quote:
Originally Posted by bobcowan (Post 926293)
Should be the same. The stack EFI systems are built to emulate the webers. I'm using a carb manifold from Blue Oval with my EFI system. Call wayne and ask him.
Sorry... but Wayne is from VeryCoolParts?

bobcowan 03-03-2009 05:10 PM
Yeah, sorry. Wayne Presley, owner of VCP.

fuji0030 05-25-2009 09:16 AM
It looks like their bond kit is a angle abandoned kit and does not attach to the assorted anywhere but at the carb ascent locations. Is this the best way to do it? I accept aswell apparent others that accept a threaded bang-up in the centermost of the manifold.

_________________
Thermostat

fuji0030 05-25-2009 09:18 AM
It looks like their bond kit is a angle abandoned kit and does not attach to the assorted anywhere but at the carb ascent locations. Is this the best way to do it? I accept aswell apparent others that accept a threaded bang-up in the centermost of the manifold.

_________________
Thermostat

bobcowan 05-29-2009 08:04 AM
I'm sorry, but I don't understand the question. Angle Abandoned? Carb ascent locations? Threaded Ban-up?

RedBarchetta 05-29-2009 12:26 PM
fuji is either a troll (2 posts), is challenged by the English vocabulary (aren't we all?) or has a grasp on advanced engineering concepts that us mortal beings will never fully understand. :LOL:

zrayr 05-29-2009 08:24 PM
Quote:
Originally Posted by RedBarchetta (Post 953434)
fuji is either a troll (2 posts), is challenged by the English vocabulary (aren't we all?) or has a grasp on advanced engineering concepts that us mortal beings will never fully understand. :LOL:
you might be correct on all three observations.

Z.


All times are GMT -7. The time now is 08:29 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: