Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Weber Tuning (http://www.clubcobra.com/forums/weber-tuning/)
-   -   Weber Stack Screens (http://www.clubcobra.com/forums/weber-tuning/99797-weber-stack-screens.html)

onefastmustang 09-21-2009 10:42 PM
Weber Stack Screens
 
I've decided to get some stack screens for my weber 48 IDA carbs. Any ideas on a good place to pick up a set for a good deal?

TIA

bobcowan 09-21-2009 11:13 PM
Here's some from Pierce Manifolds which are said to be very good.
http://www.piercemanifolds.com/airfilters.htm

Don't use this type of "tea strainer". These cost me 100hp on the dyno.

http://i13.photobucket.com/albums/a2...dies2small.jpg

coinop101 09-22-2009 05:54 AM
I was watching TV and saw these on a cobra . ITG air filters . Check them out
@ itgfilters.net

priobe 09-22-2009 06:55 AM
This is what I used

http://www.cheftools.com/2-12-inch-M...tinfo/04-0059/

*13* 09-22-2009 07:42 AM
There's nothing pretty that works. Someone needs to design a filter setup, maybe an open box that can be removed once the hood is opened. I have pictures somewhere the someone here posted of a foam box system that attached to the hood(I think it was a mustang) that when the hood closed the carbs were enclosed. Something like that would be perfect if it didn't bolt to the hood.

onefastmustang 09-22-2009 08:49 AM
I think I may be stuck with going with a flat stack screen. I don't have a whole lot of clearance between my stacks and the hood. :(

mtpockets 09-22-2009 12:19 PM
Weber Stack Screens
 
I just sent you a pm.

ASPTCOBRA 09-22-2009 02:57 PM
sent you a pm

Eljaro 09-22-2009 03:23 PM
http:///www.dellorto.co.uk/editor/up...es/48gauze.jpg[/quote]
I got them at www.dellorto.co.uk


All times are GMT -7. The time now is 07:40 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: