Weber Stack Screens

onefastmustang · #1 (**permalink**) 09-21-2009, 09:42 PM

I've decided to get some stack screens for my weber 48 IDA carbs. Any ideas on a good place to pick up a set for a good deal?

TIA

bobcowan · #2 (**permalink**) 09-21-2009, 10:13 PM

Here's some from Pierce Manifolds which are said to be very good.
http://www.piercemanifolds.com/airfilters.htm

Don't use this type of "tea strainer". These cost me 100hp on the dyno.

coinop101 · #3 (**permalink**) 09-22-2009, 04:54 AM

I was watching TV and saw these on a cobra . ITG air filters . Check them out
@ itgfilters.net

priobe · #4 (**permalink**) 09-22-2009, 05:55 AM

This is what I used

http://www.cheftools.com/2-12-inch-M...tinfo/04-0059/

*13* · #5 (**permalink**) 09-22-2009, 06:42 AM

There's nothing pretty that works. Someone needs to design a filter setup, maybe an open box that can be removed once the hood is opened. I have pictures somewhere the someone here posted of a foam box system that attached to the hood(I think it was a mustang) that when the hood closed the carbs were enclosed. Something like that would be perfect if it didn't bolt to the hood.

onefastmustang · #6 (**permalink**) 09-22-2009, 07:49 AM

I think I may be stuck with going with a flat stack screen. I don't have a whole lot of clearance between my stacks and the hood.

mtpockets · #7 (**permalink**) 09-22-2009, 11:19 AM

I just sent you a pm.

ASPTCOBRA · #8 (**permalink**) 09-22-2009, 01:57 PM

sent you a pm

Eljaro · #9 (**permalink**) 09-22-2009, 02:23 PM

[/quote]
I got them at www.dellorto.co.uk