Hank Steckel
Fri September 23, 2005 8:07am
|
Band_Clamp_4x6_smooth_side
Band Clamp smooth side view
|
|
Pete Munroe
Fri January 13, 2006 9:28pm
Rating: 10
|
ERA 289" FIA #2027
Late after noon sun is hard to beat...the car is on Hoosier Street T/D's. Look great...terrific on the track and a PAIN on the street. The old "bias" type tires will hunt like crazy on anything but a smooth asphalt surface, like a race track. Stick to radials for the street IMHO. Now on M/T S/R's.
|
|
Jbb
Wed March 8, 2006 7:51am
Rating: 10
|
|
GlynMeek
Wed September 5, 2007 10:37pm
Rating: 10
|
Smooth rear ends look SO good
|
|
Baz
Mon March 31, 2008 1:06am
|
Offside Steering Rack Mount.
Originally fitted at 10 degrees. Removed and refitted at 42 degrees to provide smoother steeering with no binding.
|
|
RJCCOBRA
Tue November 25, 2008 2:59pm
|
Shell Valley build
Welding on roll bar is finished thanks to Buddy Neely. The only thing left is to grind the welds smooth so that the roll bar can be powder coated.
|
|
fastraxsg
Wed February 18, 2009 7:20am
Rating: 10
|
Smooth shave
Singapore street barber, last '70's
|
|
Clois Harlan
Mon March 9, 2009 6:32pm
|
Installing the Bonnet
Notice the clean seams and smooth finish of the body
|
|
Bob In Ct
Sun April 19, 2009 7:14pm
Rating: 10
|
Open Road
Run to Blackie's Hot Dogs in Cheshire Connecticut on 4-18-2009.
|
|
Baz
Thu September 17, 2009 2:41am
|
Heat_Shields_for_Side_Pipes_Small_
Stainless Steel Side Pipes fitted. They have to have the welding ground smooth and polished.
|
|
Z-linkCobra
Mon November 2, 2009 11:08am
Rating: 1
|
Driver inner door
I poured and shaped the foam. Once I finish the passanger side and smooth the dash....then fiberglass work starts.
|
|
Wbulk
Fri December 4, 2009 8:59am
Rating: 10
|
Clutch Quadrant Modification on B and B
Cut off existing bracket and welded on the extra steel on the left to bolt a modified Ford Racing clutch quadrant to the arm. Much better and smoother operation.
|
|
FUNFER2
Sat February 6, 2010 5:41am
Rating: 10
|
Polished 304 stainless steel side pipes."Gilmore Kit"
Turn out. Notice how it slides between the muffler & muffler housing, for a nice tight & clean fit. Requires only a small tig weld. Use filler rod if you wish to smooth the weld.
|
|
jcraigau
Mon May 17, 2010 5:17am
Rating: 10
|
Shiny!
The KBS goes on smooth even with a brush
|
|
Tommy
Thu July 15, 2010 4:16am
Rating: 10
|
Smooth hotrod
Every component that could be hidden out of sight was on this fully functional hotrod.
|
|
