CoupedUp
Sun August 22, 2010 10:23am
Rating: 10
|
|
Bob In Ct
Mon October 4, 2010 6:12am
Rating: 10
|
Fall 2010 Connecticut
Rafting through West Cornwall
|
|
blip
Wed November 3, 2010 5:04am
Rating: 10
|
Me waiting for some track laps at Silverstone
This is a Shelby approved car Factory built by Ram Automotive, using the superb Reynard spaceframe chassis, running a 1970 Ford 351 Cleveland with quenched Aussie heads, through a 5 speed Getrag manual box.
Jag rear axle.
|
|
DaveW
Wed June 15, 2011 9:01pm
|
Superpro bushes throughout the rear suspension
|
|
lovehamr
Sun June 26, 2011 5:28am
|
Rocker nut
Rocker nut after dropping from the head through the lifter valley and reciprocating assy to the oil pan
|
|
Rotax98
Tue December 27, 2011 7:59pm
|
ah_the_lengths_we_went_to_to_measure_Motion_ratio
We made some weird and wonderful tools like this interesting piece to measure motion tration through the arc of wheel travel. The pen in the tube marked the increments on the plate at intervals as we lifted the wheel from droop to bump
|
|
silverstripe
Thu June 28, 2012 10:02am
|
DSCN0109
351 roller cam engine stroked to 427cu. forged pistons,H beam rods,ARP studs throughout,AFR heads,9qt canton road race oil pan.polished pulleys and bracket kit. high volume oil pump. billet mallory dist. billet fordmotorsports flywheel.high torque mini starter. elect fuel pump.billet air cleaner. 10.2 compression.
|
|
dcdoug
Mon June 3, 2013 7:21pm
Rating: 10
|
Holley 3255-1
Wire showing hole goes all the way through.
|
|
rodneym
Wed June 12, 2013 10:40am
Rating: 10
|
Shelby Show 5/11/13
"Honey, yes, I need 2 gallons of distilled water and a bunch of microfiber cloths".
I crept at a snail's pace in a long line of Shelby's latest Mustangs for almost 30 minutes and it was starting to get hot. They finally let me in. I got out, stretched and poof! The green steam show. Luckily the hood was down because people could have been burned and the Tiger next to me wouldn't have been happy. Coolant shot out of the hood scoop like a toddler sneezing through his nose. Nothing some water and a 5/16" wrench couldn't fix but what a mess.
Thanks for the help, Dean! (RedBarchetta)
Woudn't have been the same without 'cooler heads' (pun intended) prevailing!
|
|
CowtownCobra
Fri June 28, 2013 2:54pm
Rating: 10
|
Colo. burning 2013
The South Fork fire. We had just come through South Fork and Creede. A couple hours after this was taken the highway was closed and the towns evacuated. The picture doesn’t do it justice, it looked like a volcano.
|
|
Tengu
Tue April 22, 2014 11:12pm
|
Engine's firing .50 cal bullets through the sump
|
|
cycleguy55
Mon August 18, 2014 1:41pm
Rating: 10
|
Civic Del Sol seats, raised roll bar through windshield
|
|
Dan Case
Mon November 16, 2015 6:00am
Rating: 10
|
CSX2201 and later heater wire loom
The two fan speeds available in CSX2201 and later cars is achieved by using the dash switch to select between a low resistance and high resistance power path to the fan motor. Full current provides the high speed. Passing power through a specific 'resistance' wire provides the slow speed.
|
|
Dan Case
Thu July 13, 2017 6:28am
Rating: 10
|
B8A-8100-A 1963-64 version
This is the common radiator cap for Cobras using the Ford-McCord supplied coolant expansion tank. Ford used this "part number" for various vehicles 1957 (starting with 1958 model year) through approximately 1966. That does not mean the same tools and same exact details were used all those years. Early caps included a "B8A" text on one ear of the cap.
|
|
HighPlainsDrifter
Tue July 10, 2018 7:29pm
Rating: 10
|
DSC004701
coming home through the rocky mountains
|
|
