boxhead
Fri July 9, 2004 6:03am
Rating: 10
|
|
boxhead
Fri July 9, 2004 6:05am
Rating: 10
|
dismantled_engine
This is my engine all dismantled and ready to hone out for new rings and gaskets
|
|
boxhead
Fri July 9, 2004 6:09am
Rating: 10
|
rh_head_installed
Here you can see the engine being reassembled with all parts looking shiney and clean.
Dont ya love aluminium?
|
|
boxhead
Fri July 9, 2004 6:12am
Rating: 10
|
front_view_rebuilt_long_motor
This is the engine all assembled to a long motor stage
It is 9.00 pm on 9 july 2004 & by this time tomorrow it should be all together sitting in chassis
|
|
boxhead
Sat July 10, 2004 6:02am
Rating: 10
|
engine_mount_out_of_alignment
Here you can see what I ment when I said the mount didnt line up, the r/h mount is sitting in locateing hole
|
|
boxhead
Sat July 10, 2004 6:05am
Rating: 10
|
engine_and_gearbox_sitting_on_chassis
Here is the engine finally sitting on the chassis.
I still dont think it is right at this stage but I will figure it out.
|
|
boxhead
Wed July 21, 2004 5:38am
Rating: 10
|
number plate
This is the rego plate the guys made at work for my Cobra
|
|
boxhead
Wed July 21, 2004 5:42am
Rating: 10
|
engine stand
The guys at work told me "that is the most expensive engine stand they have ever sen"
|
|
boxhead
Fri July 23, 2004 2:43am
Rating: 10
|
jag front suspension
here is the front suspension in my car
|
|
boxhead
Sat July 24, 2004 2:43am
|
R/H rear spring/shockie
Here is a pic of the R/H rear spring/shockie assy that i fitted today
|
|
boxhead
Sat July 24, 2004 2:45am
|
Lower shockie mount
Here is a pic showing the lower rear shockie mounts that I made today.
They havent been cleaned up and painted yet so they look alittle rough
|
|
boxhead
Sat July 24, 2004 2:49am
Rating: 10
|
Wrong control arms
No matter what I tried there is no way the spring is going to fit without fouling the upper control arm.
|
|
boxhead
Sat July 24, 2004 2:53am
Rating: 10
|
Rear suspension completed
Here it is standing on its own with working rear suspension, I have also fitted the B&M shifter into the modified gearbox position (thanks Mike)
|
|
boxhead
Sat July 24, 2004 2:56am
|
MVC-010S
Here you can see that the spring/shocks are mounted almost straight up and down to gain max clearance for BIG wheels.
|
|
McCobra
Tue July 27, 2004 7:36pm
Rating: 10
|
|
