stephen low
Sat April 15, 2006 10:24pm
Rating: 10
|
gear stick too far back! - 1st fit
|
|
Zderf
Tue April 25, 2006 1:55pm
|
ShelbyBox
The worlds fastest tool box.
|
|
Tongue Pirate
Thu May 4, 2006 6:55pm
|
|
Tongue Pirate
Thu May 4, 2006 6:56pm
|
|
nanard289
Sat May 6, 2006 1:50pm
Rating: 10
|
Trottle drive
Trottle drive system is from Inglese but it is modified to have a lateral control rod instead of central (central space was too narrow!)
|
|
Whaler
Tue May 16, 2006 8:15pm
|
rear tab torn off
Rear tab to pick up the pumpkin on the irs tore right off at the weld on the left. Then over time proceeded to tear thru the homemade crossmember. 1/8" is too light of a gauge for the x-member. The tab was 3/16" but whats the point if you weld it to a 1/8 x-member??
Poor design
|
|
nanard289
Fri May 19, 2006 1:16pm
Rating: 9.5
|
Velocity stack modification
Weber horns was too long and it was necessary to cut a slide to reduce the air horns
|
|
Secret Squirrel
Fri June 9, 2006 3:38pm
Rating: 10
|
WSCB 2006 BDR144 #28
Brent Mills took this picture of me and Alan heading out to Saturday evenings car show. Thanks Brent!
|
|
hogster
Sat June 10, 2006 3:26am
|
stainless tank
The stainless tank is in place, Diff just about fully done. I noticed bent axles in the donor and sourced a pair in Darwin. New bearings pressed on, a bit of paint and doesn't look too bad.
|
|
951mat
Mon June 12, 2006 6:46pm
Rating: 10
|
I couldn't keep both for too long.
|
|
hey,littlecobra
Mon June 12, 2006 8:51pm
Rating: 10
|
In the finals, against a '66 mustang
This was exciting! She dialed in 13.10, I did 13.65. We took off---- guess who won!!!! 
|
|
JCoop
Mon June 26, 2006 7:22am
Rating: 10
|
48IDA Webers Under GT40 glass
Too bad the anti-reversionary plates hit the glass when fitted. They don't look too bad without them, though; especially with those Inglese filters. The rearmost stack is just about 1.5" below the glass.
|
|
nikbj68
Wed July 26, 2006 11:21pm
|
Wrong job?
Life`s too short for the wrong job!
|
|
nikbj68
Wed July 26, 2006 11:21pm
Rating: 10
|
Wrong job?
Life`s too short for the wrong job!
|
|
nikbj68
Wed July 26, 2006 11:21pm
|
Wrong job?
Life`s too short for the wrong job!
|
|
