hi-tech cobra
Sat July 26, 2008 6:43am
Rating: 10
|
Hi-Tech engine bay
here is the engine bay before the sbf engine mounts were cut off. Notice also, the crossmember is set up for a top loader. This had to be cut off and the cross member notched to fit the Tremec.
|
|
Baz
Thu July 31, 2008 12:18am
|
Cobra_Dash_with_new_Glove_Box_Small_
Originally, I had the glove box lid closing precisely into the glove box opening. It just didn't look right so the hinges were re-designed and a new larger lid manufactured to fit over the glove box opening instead of into it. My feelings are that this looks far neater. I am happy with the result. Thanks for the idea Phil.
|
|
fkemmerer
Thu July 31, 2008 6:02am
Rating: 10
|
ERA 753 - IAC Details
This picture shows the inside of the intake ports on my TWM stack injection setup. The brass fitting connect to the IAC motor plumbing under the intake manifold.
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
Same bracket back to back with irregular side on frame
This position permits the irregular ear side of the bracket to fit around the shock tower and any of the holes can align with the slots in the frame.
|
|
Hawkeye
Mon September 22, 2008 11:39am
|
|
vector1
Wed October 15, 2008 8:51am
|
closed_to_finished_engine_bay_002_Small_
scavenge lines were somewhat difficult to fit
|
|
vector1
Wed October 15, 2008 8:51am
|
closed_to_finished_engine_bay_005_Small_
everything fits real tight and has it's own space
|
|
Rick Yeager
Thu October 23, 2008 12:24am
Rating: 10
|
8_Door
Fitting doors and trying to shape them to fit the surrounding body areas
|
|
Rick Yeager
Thu October 23, 2008 1:11am
Rating: 10
|
14_Wiring
Final fitting and wiring of the dash
|
|
RJCCOBRA
Sun November 23, 2008 5:20pm
|
Shell Valley build
Gas tank installation, preliminary fitting.
|
|
RJCCOBRA
Tue November 25, 2008 2:59pm
|
Shell Valley build
Rear roll bar down legs were notched and fitted. The first one was the hardest. After the correct angle and length were determined, the second one was a breeze. Good thing, since we broke Buddy's 2 inch hole saw while finishing the notch on the second down leg.
|
|
albanycobra
Thu November 27, 2008 12:16am
|
IMG_1286
Darn Engineers making me fit outside door handles
|
|
Baz
Wed December 3, 2008 4:44pm
|
75_litre_Aluminium_Petrol_Tank_installed_Small_
The Fuel Tank is fitted with an 'In Tank' Swirl Pot and Internal Fuel Pump from a V8 VS Commodore.
|
|
AC-460
Tue December 30, 2008 3:31am
|
|
AC-460
Tue December 30, 2008 3:31am
|
|
