Ant
Thu March 20, 2014 1:21pm
|
|
Earl J
Mon April 14, 2014 1:45pm
Rating: 10
|
Early 48IDA parts from Jim Inglese
Jim had to scour his LA contact for the early #50 Pump Jets. He mentioned to me these were extremely hard to source as these are for the early 48IDA & 48IDA-1 Carbs. He had to re-size a few of them to #50
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
Weber Linkage on my 350 overview
I built this myself, utilizing the "as cast" bosses on the manifold. I designed the bell-crank on a special built block of steel. The linkage can be adjusted as it's design is progressive.
Simplicity at it's best, Rock solid
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
Bell-Crank close-up
Notice the Block I painted black. I stamped in a pointer (V painted in white) points to a scribed Red line on the #2 runner (just below the ARP carb stud). That is an indicator for me to view is my linkage is out of alignment. I hasn't moved once from the day i installed and adjusted it.
|
|
Earl J
Mon April 14, 2014 2:03pm
|
Return Spring and mounting bracket
I thought this was rather clever of me. That bracket curves around and clears the distributor body where I drilled and tapped a 10/31 heim joint for the dual return spring to connect. There is no binding on the return spring as well.
|
|
Earl J
Mon April 14, 2014 2:03pm
Rating: 10
|
On display at the Orinda Classic car show (2013)
We were on the 16th fairway of the Orinda Country Club Golf Course.
|
|
Hail427
Sat April 26, 2014 2:03am
Rating: 10
|
my pace build #21
start of chassis assembly
|
|
Wbulk
Sat April 26, 2014 8:47am
Rating: 10
|
SBF Lower Water Pump Block Off
SBF lower water pump block off with 1/2" oil passage plug
|
|
Wbulk
Sat April 26, 2014 8:47am
Rating: 10
|
SBF Lower Water Pump Block Off
SBF lower water pump block off with 1/2" oil passage plug.
|
|
Earl J
Wed April 30, 2014 6:20pm
|
Norcal SAAC Mini Nats 2012 #1
Bill DenBeste Hosted the Saturday evening dinner at his Windsor CA Office.
Breathtaking venue. over 50 Cobras on the wall, kind of the way one would see an old HotWheels display in a toy store. These were full scale Cobras.
Dinner was very nice too
|
|
Earl J
Wed April 30, 2014 6:20pm
Rating: 10
|
Norcal SAAC Mini Nats 2012 #4
How about a wall of engines?
|
|
Earl J
Wed April 30, 2014 6:20pm
Rating: 10
|
Norcal SAAC Mini Nats 2012 #7
Peter Brock was one of the speakers for the evening
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Overall Hinge length
The title of the picture is the measurement of the item. This is modifying a Street Beast stock hinge, by adding a piece of 4" pipe in the middle. I used it on my car and I get about 22" of door opening.
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Overall Hinge Length pic 2
The title of the picture is the measurement of the item. This is modifying a Street Beast stock hinge, by adding a piece of 4" pipe in the middle. I used it on my car and I get about 22" of door opening.
|
|
52chevyred
Sun May 18, 2014 4:34pm
Rating: 10
|
Height of pipe edge to hinge leg
This side is 1". You will have to see what works for you.
|
|
