computerworks
Fri July 30, 2004 10:05am
|
|
Tom White
Sat August 14, 2004 12:07pm
Rating: 10
|
|
outlaw
Wed August 18, 2004 10:11am
|
engine cmpt, different filter
|
|
Morris
Thu October 7, 2004 7:44pm
|
Relays for Fuel, Trans, Diff, Pumps and Fans
|
|
cobrajeff
Sun November 21, 2004 6:47am
Rating: 10
|
Weber Guages
Two on top left hold float to proper height; two lower left are for measuring float level. Top right is tang-bending tool, lower right is to measure fuel inlet needle setting. (center tools perform same functions as the two on left, just slightly different designs).
|
|
arizona slim
Sat December 18, 2004 2:23pm
|
red mountain cobra
a little differrent look for the hood
|
|
arizona slim
Sat December 18, 2004 2:38pm
|
red mountain cobra
a little different approach to stripes
|
|
Stu351
Mon January 24, 2005 11:31pm
Rating: 10
|
My current drive
351c, 300bhp, 3spd auto, 2.9 diff. Nice for cruising. 14.4@99mph 1/4mile.
1970 ZC Fairlane
|
|
Rick Parker
Sun January 30, 2005 7:37pm
Rating: 10
|
Remote filter and slave cylinder
The above adapter has now been replaced with one from Aviaid, which weighs much less and is more compact. The hose connections were at undesirable angles and too close to the pan making it difficult to tighten them.
|
|
Brent Mills
Mon March 21, 2005 7:27pm
Rating: 10
|
KMP286
Kirkham 286 a little further along in the polishing....I can't stress enough how difficult it is to get polished without lots of scratches/swirls/etc. Looks stunning at dusk or cloudy, but hardly looks perfect and very much unfinished in sunlight.
|
|
cobrajeff
Fri March 25, 2005 7:22am
Rating: 10
|
Tail of the Super Coupe
The tail end treatment on Shelby's big-block Super Coupe was quite different from that of the small-block coupes.
|
|
simon clemens
Mon April 11, 2005 5:07am
|
Rear end
Diff housing is shortened, & is waiting for coilover brackets to be welded into place.
|
|
simon clemens
Mon April 18, 2005 4:52am
|
Adjustable Trailing Arms
Adjustable Commodore Top Trailing Arms have been used to set correct pinion angle.
|
|
simon clemens
Mon April 18, 2005 4:52am
|
Diff Brackets All Tacked
Suspension Brackets all tacked in position.
Lower shock brackets have 3 position height adjustment, this will make it easier to set a good ride height.
|
|
simon clemens
Wed April 27, 2005 7:00am
|
3 Position Height Bracket
3 Position suspension height bracket on lower coilover eyelet.
12 Position dampen rate on 'QA1' shock. Plus adjustable spring tension.
Shortened BW Diff.
New 28 spline axles.
New 3.73:1 gear set.
New 4 pinion LSD assembly.
|
|
