GASKETBOY
Thu November 13, 2008 1:03pm
Rating: 10
|
|
GASKETBOY
Thu November 13, 2008 1:03pm
Rating: 10
|
|
GASKETBOY
Thu November 13, 2008 1:03pm
Rating: 10
|
|
GASKETBOY
Thu November 13, 2008 1:03pm
|
|
GASKETBOY
Thu November 13, 2008 1:03pm
|
|
RJCCOBRA
Tue November 25, 2008 2:59pm
|
Shell Valley build
Holes were cut and the main roll bar hoop installed. Roll bar and down legs were made out of 2 inch DOM .120 wall mild steel tubing. Bending was done by Boyce Industries in Melrose Park, IL.
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
The 390 FE (formerly owned by Bob Brown) was removed from the frame so that all of the mounts (engine, roll bar, shoulder harness, oil filter, etc.) could be final welded and the frame painted. The oil dipstick tube was relocated to the outside of the lower alternator bolt.
|
|
RJCCOBRA
Sun December 14, 2008 1:49pm
|
Shell Valley build
The transmission has been cleaned and painted. The transmission is a close ratio, big input/big output, Ford toploader. We should be able to get the motor and transmission reinstalled in the chassis by Thursday.
|
|
1985 CCX
Sun December 21, 2008 9:27am
|
Original 60's screens
Was lucky to find these original side mount screens. These were the type used in the 60's which differ by full winding of the screen versus tack weld to the ring and no pop snaps, they mount via SS side brackets and funky knobs.
|
|
Michael J
Thu January 1, 2009 4:54pm
Rating: 10
|
CSX 2002
CSX 2002 as seen at Steamboat Springs, CO. vintage races, 1998. The first Shelby American competition car according to the placard at the front of the car. Driven by Shelby American team drivers; Krause, Gurney, Miles, Brock, McDonald.
Contact me at lightcatcher@bresnan.net for more details.
|
|
SoTxButler
Sun January 11, 2009 12:43pm
|
Billet Stack Manifold for High Rise Heads
Billet stack manifold by Paul Swartz of www.swartzracingmanifolds.com Had to build this to fit stacks on the high rise heads.
|
|
john chesnut
Fri January 16, 2009 9:27am
Rating: 10
|
C5SP34rear
1980lbs, C5 Corvette parts, steel space frame, original body inspired by 50's sports racers
|
|
john chesnut
Fri January 16, 2009 9:27am
Rating: 10
|
C5SPjohn
Stock C5 Corvette wheel base and track, Z06 wheels and tires, engine moved rearward by 22 inches, 38 inches tall, 77 inches wide. When sitting my head is below head fairing.
|
|
Ron61
Mon January 26, 2009 11:20am
Rating: 10
|
|
"Q"
Tue February 3, 2009 1:58am
Rating: 10
|
Victor's Toy shot by friend Pieter Oosthuizen
Cobra's from South Africa
|
|
