lovehamr
Mon February 11, 2013 7:23pm
Rating: 10
|
BDR 1/2" fuel line
Installing 1/2" fuel line for FI in my BDR
|
|
lovehamr
Mon February 11, 2013 7:23pm
Rating: 10
|
BDR 1/2" fuel line
Installing 1/2" fuel line for FI in my BDR
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
Cobra Finished at my shop
My Cobra enjoying a sunny day.
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
302 Engine bottom view
This is the 302 engine in my Cobra. It came from a '90 Mustang and was just built for drag racing. It loves to be under a load.
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
749 Miles
I put 749 miles on my cobra in 2012, going to car shows.
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
Tilton Pedals
These are my Tilton brake & Clutch pedals. The gas pedal is a Lokar Spoon.
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
Frame Painted
This is my Cobra Frame, painted by Bruce Bunn at JODECO auto body in McDonough, Ga
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
Fan, Headlight switch
This is my headlight switch, fan override switch and interior light switch
|
|
52chevyred
Thu February 21, 2013 4:00am
Rating: 10
|
Lifter Valley
This is the "untouched" lifter valley on my 302. I pulled the intake to powder coat it.
This is one clean engine.
|
|
406cobra
Sat March 9, 2013 9:06pm
Rating: 10
|
Arntz Racer
Before new body and paint
|
|
406cobra
Sat March 9, 2013 9:21pm
Rating: 10
|
Arntz Racer
Before new body and paint
|
|
289Cobra
Fri April 5, 2013 4:17pm
|
2009 Snakeskin Green PearlCoat VIPER Roadster
I sold my 05 Copperhead Viper and Bought This 09. It has over 600HP and is way faster that ANY Cobra I have ever owned - AND HAS AIR CONDITIONING!
|
|
289Cobra
Fri April 5, 2013 4:17pm
|
2009 Snakeskin Green PearlCoat VIPER Roadster
I sold my 05 Copperhead Viper and Bought This 09.
|
|
289Cobra
Fri April 5, 2013 4:19pm
Rating: 10
|
Interior of my 09 Viper - RARE TAN LEATHER
Interior of my 09 Viper - RARE TAN LEATHER. Only 3 made with this exterior color and Tan leather.
|
|
Pete Munroe
Sat May 11, 2013 12:14pm
|
Notching a Weiand Stealth manifold like Edelbrock Air-Gap
My "home made" Bridgeport Mill...well, have a milling bit anyway...took a while to figure out how to feed the work so the bit wouldn't chatter. First pass the bottom was uneven. Second pass rigged up a better support and got the notch parallel to the carb pad.
|
|
