DAVID GAGNARD
Wed August 24, 2005 12:42pm
Rating: 10
|
MVC-004S1
home made gauge panel for 65 mustang vintage road race car......with gauges/warning lights
|
|
cobrajeff
Fri September 16, 2005 2:24pm
Rating: 10
|
Raydyot mirror mount
Custom mirror mounts I had made for my car. Note with this configuration, windwings are not used.
|
|
simon clemens
Sun September 18, 2005 7:08am
|
Fuel Filler Modified
Unleaded restrictor plate installed. Made it out of 3mm aluminium & welded it to the filler neck.
|
|
boxhead
Mon October 10, 2005 5:30am
|
Centre dash support
Here you can see the centrre dash support I have made.
The flat piece is removed when the dash is in place.
|
|
fastraxsg
Thu December 1, 2005 6:51am
Rating: 9
|
Cobra wannabe
Before the sanding, filling, sanding, filling, etc. started.
Local made body, one of four, only two left on the road. The only Cobra replicas in Indonesia. From 100 feet its close but no prize. Here in Indonesia, no one can tell the difference.
|
|
fastraxsg
Sat December 3, 2005 4:30am
Rating: 1
|
Jan_2002
First view of the roadster before buying, local redition of a Cobra, made from a Holden Torana with a local made fiber body, in line six, four speed. Group who made it only had a couple of photos to go by and a junk cars, made 4, two still on the road.
|
|
fastraxsg
Sat December 3, 2005 5:04am
|
Viper Wannabe
Same shop that made the body for my roadster also did this. Based on a Holden chassis and proposed in line six, not exactly a power house. Never finished to my knowledge
|
|
BOURRET
Tue December 27, 2005 2:40am
Rating: 10
|
Season's Greetings card
A dream I made: lonely in the Snow in front of y favorite Christmas tree
|
|
Terry Stapley
Fri January 20, 2006 8:53am
Rating: 10
|
Owner Made Sidepipes
Owner Made Sidepipes
|
|
Terry Stapley
Fri January 20, 2006 8:54am
Rating: 10
|
Owner Made Sidepipes
Owner Made Sidepipes
|
|
Venomus
Fri January 20, 2006 4:19pm
|
Finally....a rolling chassis.
Also a picture of a Stainless fuel tank that we just made. It actually will bolt on from underneath the frame and will be removeable once the body is on. It still need to be polished.
|
|
Harold Gumm
Fri January 20, 2006 10:41pm
|
Special Fan Bracket Made From SS
|
|
Blittleton
Sun February 5, 2006 8:59am
Rating: 10
|
Backdraft Full Front Cover
Made by Fender Gripper
|
|
CobraBrazil
Fri February 10, 2006 5:09am
Rating: 9.38461
|
|
CobraBrazil
Fri February 10, 2006 5:20am
|
|
