cobrajeff
Sun November 21, 2004 6:35am
Rating: 10
|
Weber Float Adjustment
This is a tool used to bend the tang to adjust the float level on Webers.
|
|
cobrajeff
Sun November 21, 2004 6:37am
Rating: 10
|
Weber Float Level
Using tools to measure float level. Spring to hold float in "up" position not shown.
|
|
cobrajeff
Sun November 21, 2004 6:40am
Rating: 10
|
Weber Floats
This tool replicates the height of the inlet needle valve.
|
|
cobrajeff
Sun November 21, 2004 6:42am
Rating: 10
|
Weber Tools
This gage is used to check "installed height" of the fuel inlet valve.
|
|
cobrajeff
Sun November 21, 2004 6:47am
Rating: 10
|
Weber Guages
Two on top left hold float to proper height; two lower left are for measuring float level. Top right is tang-bending tool, lower right is to measure fuel inlet needle setting. (center tools perform same functions as the two on left, just slightly different designs).
|
|
mj_duell
Wed December 29, 2004 9:16am
Rating: 10
|
Cobra Ferrari Wars DVD
http://www.cfwars.com/
Ten years in the making, this fast-paced, sixties-style, split screen epic with an amazing soundtrack tells the extraordinary story of how Carroll Shelby, together with a bunch of Southern Californian hot-rodders took on the might of Enzo Ferrari and his GTO in the mid 60s.
|
|
StephenC
Mon January 24, 2005 8:22pm
|
Walt's SPF Too
Walt's SN8K at Robert Moses Lighthouse
|
|
Rick Parker
Sun January 30, 2005 7:37pm
Rating: 10
|
Remote filter and slave cylinder
The above adapter has now been replaced with one from Aviaid, which weighs much less and is more compact. The hose connections were at undesirable angles and too close to the pan making it difficult to tighten them.
|
|
Mulv
Sat February 5, 2005 5:40pm
|
|
Mulv
Sun February 6, 2005 3:48pm
|
Mustang Clears Too!
Lowered 66 Mustang - door still clears by a mile
|
|
Mulv
Sun February 6, 2005 3:52pm
|
Rear View Mustang
Great Transporter for other cars too!
|
|
Mulv
Sun February 6, 2005 3:54pm
|
Mustangs and Tigers too!
Lightweight nature does not preclude capacity.. easily holds non replicas as well!
|
|
cobrajeff
Wed February 23, 2005 6:25pm
Rating: 10
|
Collapsible spare tire
This is what my trunk looks like with a collapsible spare tire mounted on a narrow (5") PSE Halibrand wheel. Plenty of room left for tools, wax, and whatever else.
|
|
simon clemens
Fri March 18, 2005 4:14am
|
New Crank Pully
I had a crank pully custom made out of aluminium, the original pully had too many un-needed bits. I also wanted the power steering pump rpm reduced, so I had a smaller pully machined, this should also reduce some load on the engine 
|
|
Secret Squirrel
Fri March 25, 2005 10:24am
Rating: 10
|
Award Presentation
Recieving "1960 Model - Best Car" Trophy and a Kiss too!, SunRunners Car Club Show, Imperial, CA, 3/20/2005
|
|
