Bruce Edwards
Thu January 22, 2004 5:40pm
|
Dash wires
We used a 96 Cougar for the parts car and fitting the Cougar harness to the car was a bit of a trick. Lot of wires to cut out and trace. If you want to go Fuel injection you have to pay to make it all work! What a mess! Helps when you have the wiring diagrams ;-)
|
|
Bruce Edwards
Thu January 22, 2004 7:38pm
|
Fuel tank
So what do you do when no one makes a tank for your ride for a fuel injected car? Make one up yourself!
|
|
Bruce Edwards
Mon January 26, 2004 4:37pm
|
4.6 Supercharged dash
A picture from the right side of the car showing the AC vents and controls. I know I still need to finish trim the rug.
You can also see the lights in the middle of the dash. Turn lights on top left and right, high beam in center, yellow is Alt light for a back up and the new Ford harness needs a light or resister to make the regulator work, red light for computer problem and at the bottom the green light is for the overdrive lock out.
|
|
Bruce Edwards
Mon January 26, 2004 4:41pm
Rating: 10
|
Door Panel
Left side door panel. This one is a pocket we also make a molded door pocket for those that do not like the elastic.
|
|
Aussie Mike
Tue February 3, 2004 5:26am
|
Pedals
Just about finished making the brake and clutch pedals. The brake has a tilton balance bar incorporated into it and actuates two Wilwood master cylinders, The clutch is a single 3/4" wilwood master cylinder. I've still got to make the loud pedal but having the brake and clutch pedals adds a new dimension to sitting in the car and making broom broom noises.
|
|
big_rob
Tue February 10, 2004 9:27pm
|
my first hot rod
it makes me sick that i sold for 8k but you gotta do what you gotta do
|
|
Bill E
Tue February 24, 2004 9:51pm
|
Dry sump
Dry sump fore vacks and one oil pump. this one makes about 700HP
|
|
Rodney
Wed February 25, 2004 11:23pm
Rating: 10
|
Stainless rock/bug mesh
All openings rad, oil cooler and fresh air inlets have my 304 #10 stainless steel screen which protects the rad and oil cooler and makes my car unique!
|
|
boxhead
Sun February 29, 2004 12:20am
Rating: 10
|
L/H rear suspension & driveshaft
Here you can see the L/H rear suspension all bolted into place, next job isto make & fit the brake & fuel lines
|
|
Rodney
Thu April 1, 2004 1:48pm
Rating: 10
|
Widow maker through my cockpit
|
|
Fox
Sat June 5, 2004 7:14pm
Rating: 10
|
Made room for gauge
1/4" taken off the fuel lines to make room for fuel pressure gauge.
|
|
pgermond
Sat June 26, 2004 7:45pm
Rating: 10
|
Snake Bite Gallery
I show this to anyone who wants a ride, but it doesn't seem to make a difference Who will be the next?
|
|
OhBuoy
Wed June 30, 2004 3:41pm
Rating: 10
|
Bob makes emergency repairs
|
|
elgecko
Fri July 2, 2004 1:45pm
Rating: 9
|
Corvette rear
It's soon going to be time to cover this in aluminum. It looks pretty.
Do they make "clear" aluminum? HAHA
|
|
BevanWright
Tue July 27, 2004 3:53pm
|
Brake_Duct_Template
This template can be used to make a brake duct for the front brakes. It fits in behind the oval openings on the front of the car.
You will notice that a bit isnt shown (unfortunately the scanner only does A4 standard page size. You can finish by folding the image in half and tracing the other side.
You may also wish to add tags to mount to the body.
|
|
