 
Main Menu
|
|
Nevada Classics
|
|
Advertise at CC
|
| S |
M |
T |
W |
T |
F |
S |
| |
1 |
2 |
3 |
4 |
5 |
6 |
| 7 |
8 |
9 |
10 |
11 |
12 |
13 |
| 14 |
15 |
16 |
17 |
18 |
19 |
20 |
| 21 |
22 |
23 |
24 |
25 |
26 |
27 |
| 28 |
29 |
30 |
|
|
|
|
|
|
CC Advertisers
|
|
Dave Samson
Sat March 23, 2002 12:50am
Rating: 10
|
Holden 308 ci
EFI,PFI,Crane cam,ported heads,MSD ignition,electric cooling system,Vortech supercharger and air/water intercooled, Mondo blow-off valve.
|
|
ford428
Tue April 16, 2002 3:59am
|
|
SFfiredog
Thu May 9, 2002 9:45pm
Rating: 10
|
Here is the motor I built for Joe Cloutier's SPF
Here's the motor for Joe C's SPF. 514 ci 429 SCJ, FPP aluminum heads, Blue Thunder intake and 2 750 Holleys.
|
|
PSB
Thu June 6, 2002 9:27pm
Rating: 10
|
408W
My almost finished 408W. Parts include - Scat 9000 crank, forged h-beam rods, Probe pistons, Comp cams custom grind camshaft, AFR 185 heads, TFS intake
|
|
Great Asp
Fri June 14, 2002 2:25pm
Rating: 10
|
1380's motor
1380's motor is a 418 stroker, built with Eagle crank and rods, 205 intake runner AFR heads using 155 lb valve springs, and a .600 gross lift cam. Vic Jr intake, with a 750 Race Demon Carb tops off the motor.
|
|
Tim Bello
Wed July 3, 2002 9:02am
|
FOR SALE
Only 15 Miles on it, built for motion picture....
Beautiful Dupont bright silver with metallic black racing strip. 351W Ford V8 engine; 407.53Hp; 5-speed Termac transmission; Steel tube frame; IRS suspension system; all-wheel disc brakes; upper & lower control arms; front & rear anti-sway bars; steel framed doors (hinged/latched to steel frame); World production cylinder heads; custom-built hinges; side vent louvers; front & rear bumper; side pipes; 18 gallon fuel tank; VDO gauges; vinyl interior; 15” custom wheels & tires; 14” steering wheel; windshield; doors, trunk & hood hinged and installed; enclosed trunk; heat shields in floor to prevent excess heat; 4 pt. seatbelt harnesses;AM/FM/CD player w/built-in speakers; color sanded base/clear-coat paint.
$ 38,000.000 Includes shipping! Call Tim 818-554-3792
|
|
Naja
Sat August 17, 2002 11:44am
|
Naked 533 cid EFI
A look at Naja's powerplant with most of the 'accessories' off of it. Atop is a 1200 cfm Accel throttle body, then a Torker II manifold (a significant restriction for this engine), to the new Edelbrock 6066 aluminum heads, 65 lb. Siemens injectors (supplied by an Aeroequip pump). Custom grind roller CompCam with .662 i/e lift, solid lifters, roller rockers under the custom valve cover by Innovation West (only ones like them in the world). A medium stoker with .080 overbore gives 533 cid. Wiseco pistons have 18cc dish to give 9.8:1 compression ratio. I was surprised when the redline was set at 7k, but the 2 people doing the engine work said it would have no trouble handling it.
It dyno'd at 491 hp (5200 rpm) and 548 ft-lbs (4700 rpm) - remember the Torker II being a huge restriction. It was built with reliability (first) in mind, then for torque. The lowest rpm that they data logged during the dyno was 2600, and it was already doing 525 ft-lbs.
This powers a C6 tranny leading to a 9 inch, live rear end with a 2.73 running gear. Haven't run it on the road much, but have gotten over 15 mpg on two, short trips. Spark control completely MSD including 7AL-2, Pro Power HVC coil, billet distributor with Pro cap. All of this is managed by a SpeedPro ECU. It idles at about 950 rpm.
|
|
khall
Sat August 24, 2002 1:22pm
Rating: 10
|
|
351W/393 Performer RPM Air Gap, Victor Jr. heads
|
|
Mark Roe
Thu September 12, 2002 9:40pm
Rating: 10
|
It's coming together!
The heads have arrived and the final build on the Dyno is in progress.
|
|
speed220mph
Thu November 7, 2002 11:21am
Rating: 10
|
427 side oiler, tunnel-port heads
ERA #409 powered by 570 HP 427 side oiler. Dual 650 Holleys.
|
|
Charlie Conner
Tue November 19, 2002 9:41am
|
GT 40 Aluminum Heads
I have just worked the ports and runners over and shaved these y303 heads combustion chambers down to 55 cc's, those are Proform 1.7:1 pedestal mount rockers which fit under the short cast aluminum valve covers after you remove the baffles and machine the mounting bosses flush. Craig Blood of Blood Enterprises in Auburn Washington is my chief technical advisor, parts supplier and machinist for the shaving and valve cutting, i cannot recommend he and his crew highly enough! If you want the best quality and no BS he is your man.
|
|
PatBurke
Sat December 14, 2002 3:08pm
Rating: 10
|
434 ci 850 HP FE
434 ci, 850+ HP, 9500 RPM, naturally aspirated. Shelby block, Dove heads, Scat billet crank, 15.8 to 1 compression, .900 lift roller cam, carbon fiber intake.
|
|
W2zero
Tue January 21, 2003 1:36pm
|
302 roller
302 GT40-P heads homeported, K-Code cast HiPo manifolds, rollercam and rockers
|
|
walt347
Sat January 25, 2003 5:03am
|
|
STROKER
Mon February 3, 2003 4:42pm
Rating: 10
|
Assembled Engine 2
480ci, All Aluminum w/Crower Billit internal's. Full Port & Polished Heads. Shelby Investment Cast SST Rockers.
|
|
|
All times are GMT -7. The time now is 07:04 PM.
Links monetized by VigLink |
