jbcobra67
Mon February 15, 2010 5:59am
Rating: 10
|
South Louisiana
3rd time this winter. Global Warming, yea right.
|
|
shawnpreston
Tue February 16, 2010 5:34am
|
CC #18
This is the original options list for my Cobra.
|
|
Z-linkCobra
Thu February 18, 2010 8:25am
|
Trunk hinge support
When I got this kit the trunk lid and hood were not attached to their frames. So before joining the two together I figured I would give the hinges something solid to bolt to...and also add some strength. The holes are 5/8 and I am making some press fit threaded collars to put in the holes for 3/8 bolts.
|
|
BMK
Sat February 20, 2010 7:48pm
Rating: 10
|
Sold my Mustang Coupe to this bike rider
Sold my Mustang Coupe to Cadel Evans. He still has it. Perhaps we will do weddings with my convertible when he retires from cycling!!!
|
|
cameron02
Thu April 1, 2010 4:49pm
|
almost finished
Plenim, and throttle body adaptor have been HPC coated as has the intake tube (not visable in this pic)
|
|
Wbulk
Tue April 13, 2010 5:37pm
Rating: 10
|
Modified B and B Suspension Mounts
This was to correct a defect on some cars sold in 2009. The lower tubes were raised to the proper position in the picture. The upper mounts were redesigned and raised to accept a longer shock. This corrected bump steer, roll center and shock travel issues.
|
|
magda
Fri April 16, 2010 12:49pm
|
Python
This engine bay belongs to a famous F1 racer 4.6lt with supper charger 610hp engine by Seah Hyland Motorsport Canada on pump gas
|
|
Z-linkCobra
Mon April 26, 2010 2:36pm
|
Radiator mounted too!!
Got that done this weekend too. Well it was done but after I got the hood done and had a good freind come over and take a look...I decided to move it a little...Thanks for the input Russ.
|
|
fkemmerer
Sat May 1, 2010 5:21pm
|
Custom EFI Sensor Mount in ERA air vent
This is a view for the final ATS installation in an ERA air vent control.
|
|
fkemmerer
Sat May 1, 2010 5:21pm
Rating: 10
|
Custom EFI Sensor Mount in ERA air vent
This is the orignal ATS location
|
|
52chevyred
Mon May 3, 2010 3:35pm
Rating: 1
|
Street Beasts Trunk Surgery
This is a wide view. I have heard of folks "cutting the trunk", now I'm a club member.
|
|
Wbulk
Wed May 5, 2010 11:15am
Rating: 10
|
Modifed Suspension on a B and B with Modified Upper Mount and Longer Shock
One option for some cars starting around vin 411 that may have had a design problem. The lower A Arm mount was moved up and new higher shock mount was made. This corrected bump steer and roll center flaws. It also gave the suspension a greater travel. Instructions available upon request.
|
|
Wbulk
Fri May 7, 2010 11:44am
Rating: 10
|
Ball Joint Seal Ring
This is a Fix for A Arms that use the Chrystler ball joint without a seal groove machined in. This one was from B and B. A 3/16" steel ring was added to accept the ball joint seal. It was tack tig welded on the outside edges. The rings were cut on a water jet by Kirkhams Motorsports. Barry McGill can also do the fix.
|
|
Dangerous Doug
Thu May 13, 2010 9:37pm
Rating: 10
|
ERA 289FIA Cobra First Drive and fully sorted
This is the day of my first drive after getting my Cobra back from paint and reassembling it. I took a vacation day off from work, and did a 12-hour blitz to reassemble it. This photo was my first drive right after the blitz. DD
|
|
lal Naja
Wed June 2, 2010 9:53pm
|
Setting up the bell housing
This is as close as I can get it. Well within mfg's. specs.
|
|
