Michael C Henry
Sat January 15, 2005 4:11pm
Rating: 10
|
Notice the even gap between the rear edge of windsheild frame and front edg
I made longer lower hinge brackets to keep windwing from being broken when it is bumped inward against the windsheild frame
|
|
Michael C Henry
Sun January 16, 2005 5:54pm
Rating: 10
|
windwing lower bracket even gap wing to frame
This is the longer lower hinge bracket I made.It moves the wing to a position where the edges meet evenly. It will fold flat for clearence in the garage. The way it used to be The wing hit at a point and any force would break the windwing.
|
|
simon clemens
Tue January 25, 2005 2:41am
|
Firewall fabrication
Made cardboard template for the firewall, then transfered the pattern to 2.5mm steel plate.
|
|
simon clemens
Wed January 26, 2005 7:12am
|
Firewall fabrication
All folds were made with oxy and clamped angle iron. Brake booster and clutch master fit perfectly. I will have the firewall ceramic coated the same as the exhaust, this should help keep my feet cooler in the footwell.
|
|
simon clemens
Wed January 26, 2005 7:12am
|
Firewall fabrication
All folds were made with oxy and clamped angle iron. Brake booster and clutch master fit perfectly. I will have the firewall ceramic coated the same as the exhaust, this should help keep my feet cooler in the footwell.
|
|
Rodney
Tue March 15, 2005 12:35am
Rating: 10
|
Modified gas pedal
Made it wider for easy heel and toe operation
|
|
simon clemens
Fri March 18, 2005 4:14am
|
New Crank Pully
I had a crank pully custom made out of aluminium, the original pully had too many un-needed bits. I also wanted the power steering pump rpm reduced, so I had a smaller pully machined, this should also reduce some load on the engine 
|
|
cobrajeff
Wed March 23, 2005 9:26am
Rating: 10
|
Plastic Valve Covers
Here are two sets of plastic COBRA valve covers I made in the 70's. Thought the clear ones would really be cool. To really get the detail, I would have had to drill small air holes in them to get the vacuum machine to work well - I wasn't willing to do that.
|
|
Mike Simard
Sat March 26, 2005 9:32am
|
DSC05164_JPG
Turn 7 at Road Atlanta. The brakes overheated and went to the floor at this turn on on of the laps. Eeek! Made it back OK.
|
|
simon clemens
Sun April 3, 2005 7:53am
|
Hood Pull
Bracket made to mount '82'Corolla boot lock. Bracket will be fibre glassed to the firewall.
|
|
mj_duell
Tue April 19, 2005 9:09am
|
Hand made stainless prop and brass catch
|
|
mj_duell
Tue April 19, 2005 9:09am
|
Hand made stainless prop and brass catch
|
|
mj_duell
Tue April 19, 2005 9:09am
|
Hand made stainless prop and brass catch
|
|
Secret Squirrel
Wed April 20, 2005 7:34am
Rating: 10
|
Fender Protectors - Spats
I made these fender protectors from static cling limo tint. Installed 2/27/2005.
|
|
simon clemens
Sun May 1, 2005 7:21am
|
Dashboard Aluminium
Starting to make the dash, made a cardboard template & transfered the shape to 4mm aluminium plate. With a few bends in the right places it should look great!
|
|
