Kimark55
Thu November 26, 2009 5:57pm
|
Door handle
This the Door Handle
|
|
63mercury
Thu November 26, 2009 6:38pm
|
the garage
this building is 40' across the front and 60' deep
|
|
kitcarbp
Sat November 28, 2009 5:27pm
Rating: 10
|
Derale PS cooler installed
The 24 inch frame rail cooler worked great on my mounts in front of radiator. This cooler reduced my reservoir fluid temps from 250F down to 140 F !
|
|
kitcarbp
Sat November 28, 2009 6:09pm
Rating: 10
|
Mcleod steel flywheel for 460
This also shows my home made engine plate I made with a jig saw and a nice set of files. Trick was to use the old rusted one as my template and the starter bolt holes and register bore was my datum point to ensure correct starter alignment.
|
|
Rob. Smith
Mon December 7, 2009 3:17am
Rating: 10
|
Chopped_1
This is the slight modifications done to the frame
|
|
Rob. Smith
Mon December 7, 2009 3:17am
Rating: 10
|
Done_1
Is this looking good or not ?
|
|
Rob. Smith
Mon December 7, 2009 3:17am
Rating: 10
|
Original_seat_1
This is the ADR approved seat frame supplied by RMC
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
Driver side inner door
This is the proposed pattern I am thinking about. The blue part will painted to match the car...the black will be carpeted to match the floor.
|
|
Z-linkCobra
Mon December 14, 2009 6:10am
|
passenger side inner door
This a different proposed pattern I am considering. Again the black will carpeted to match the floor and the blue would be painted to match the car.
|
|
Wbulk
Sun December 27, 2009 10:44am
Rating: 10
|
Switch Bracket for Fiberglass Dash
Design of Ignition Switch Bracket to keep the switch from turning in a fiberglass dash. The corners of this are glassed in to the back of the dash with kitty hair fiberglass filler.
|
|
Z-linkCobra
Thu December 31, 2009 5:43am
|
Frame tip
This is the front right frame tip of my E.M. chassis. I am a little confused as to what the inner bracket is for.
|
|
Z-linkCobra
Thu December 31, 2009 5:43am
|
Aluminum 302 block
This is a picture of the aluminum block I'm running. It is an exact copy of the one I ahve for sale.
|
|
Z-linkCobra
Thu December 31, 2009 5:43am
|
Valley area of the block
Just a pic to show the valley area and reinforcements that are casted into this block.
|
|
52chevyred
Fri January 1, 2010 6:51am
|
351W with SB Headers
This is the dummy 351W with the headers from Street Beasts. Earlier, I tried Factory Five headers, but they just wouldn't work out on this body.
|
|
52chevyred
Fri January 1, 2010 6:51am
|
351W centered with headers
This is the 351W dummy located, with headers.
|
|
