CSX3018
Sun December 23, 2012 5:02pm
Rating: 10
|
Sebring 2012 Lorne Leibel CSX2230
|
|
CSX3018
Sun December 23, 2012 5:11pm
Rating: 10
|
Sebring 2012 W.Ockerlund Cobra CSX2136
|
|
CSX3018
Mon December 24, 2012 2:31pm
|
AC Cobra CSX2136 W.Ockerlund SEBRING 2012
|
|
cobrajeff
Fri December 28, 2012 3:44am
Rating: 10
|
BOSS 351 with Webers
I swapped the BOSS 351 engine out of the 1971 BOSS 351 Mustang that my Dad bought new nto the Pantera. I ran an experimental Ford 3-deuce setup for a while, but eventually swapped over to Webers.
|
|
cobrajeff
Fri December 28, 2012 4:20am
|
BOSS 351
I modified my BOSS 351 with a set of Shelby ten-spokes, a Mach 1 urethane front bumper, custom grille, and rear window louvers.
|
|
HighPlainsDrifter
Fri December 28, 2012 10:17am
Rating: 10
|
2012 F150
New 5 liter, 6 speed select shift, 4x4,Leer canopy.
|
|
justcobra
Sun January 6, 2013 7:22pm
|
RMC Series 3
Shell on trailer with door opened and roll over bar in temporary position,
|
|
justcobra
Sun January 6, 2013 7:25pm
|
RMC Series 3
Doors opened with red seats in place.
|
|
justcobra
Sun January 6, 2013 7:30pm
|
RMC Series 3
Left hand photos showing door opened with red buckets fitted although temporary.
These buckets were previously fitted to a older Cobra and bought on ebay for $100 a pair.
They are SAAS modified seats with a 41cm base/cushion
The seats look good but I think a little narrow!
|
|
justcobra
Sun January 6, 2013 7:40pm
|
RMC Series 3
Here is another view of the SAAS racing seats which were modified at great expense by previous matured aged Cobra owner and bought cheaply by myself.
These seats were legal at the time of the build according to the previous owner which I do not doubt.
To those that Modify Mazda MX5 seats here is another option if you operate on a budget.
I tried to fit MX5 seats into the RMC and they do not fit unless you modify the floor or tracks which defeats the whole purpose when you can pay upto $600 a pair.
|
|
snakebiteforu
Tue January 29, 2013 2:04pm
Rating: 10
|
Corbeau Leather Classic Bucket Seats
Backdraft with Corbeau Leather Classic Bucket Seats
|
|
CSX3018
Tue February 12, 2013 4:08am
Rating: 10
|
Sebring 2012 CSX2136 W.Ockerlund
|
|
CSX3018
Tue February 12, 2013 4:08am
Rating: 10
|
Sebring 2012 CSX2230 Lorne Leibel
|
|
LightNFast
Mon February 18, 2013 9:33am
Rating: 10
|
FIA_Suitcase_Study1
It’s documented that (2) AC factory cars were prepared with FIA suitcase "dimples" (See Photos). The second modification was to enlarge the trunk base to allow the suitcase to fit upright (vertical) and further down into the trunk as shown. If you look closely at the photo you can see the suitcase also fit horizontal and was held in place with a “bungee cord”. You can also see the bolts protruding out the bottom of the suitcase which originally held the suitcase upright. I think this also explains why some of the FIA cars had dimples while others didn’t.
As for the actual size of the suitcase – FIA Historic Racing Championships - Appendix J. Both 1964 and 1965.
State:
“270 - Luggage trunk
A covered space being an integral part of the coachwork but outside of the space occupied by the front seats, large enough to receive a trunk of
65 cm X 40 cm X 20 cm. minimum, besides the spare wheel, tools or the folded hood, shall be provided, excluding the spare wheel, tools or removed canopy.”
|
|
LightNFast
Wed February 20, 2013 4:13am
Rating: 10
|
11_CSX_2259_Sebring2
FIA car (2259) at Sebring 1964 - Never made it to Europe and also didn't have trunk dimples.
|
|
