TWOOD
Mon September 1, 2008 3:51pm
|
SAME BRACKET BACK TO BACK
Assuming that the reatangular side should be placed on the frame and the "ears" ar ewhere the control arms mount.
This would place the left and right control arms in different planes and not parallel to each other.
The rectangular side has a interference with the shock tower and the mounting holes do not align and not adjustment is possible.
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
Same bracket back to back with irregular side on frame
This position permits the irregular ear side of the bracket to fit around the shock tower and any of the holes can align with the slots in the frame.
|
|
TWOOD
Mon September 1, 2008 3:51pm
|
alternate possible position, rectangular side to frame
Note straight edge of bracket is in contact with the shock tower and the only one of the two holes will align with the mounting bolts.
|
|
tcrist
Sat October 4, 2008 11:26am
Rating: 10
|
alignment_saver_
Alignment Saver for MII ans street rod application
|
|
tcrist
Tue October 14, 2008 7:45pm
|
|
tcrist
Tue October 14, 2008 7:45pm
Rating: 10
|
alignment_saver_straight_
|
|
RJCCOBRA
Thu November 13, 2008 3:17pm
|
Shell Valley build
The cowl hoop & windshield are mounted, and drivers side rear wheel well sectioned for tire clearance. I don't know what jig Shell Valley used to align the interior tub to the body, but it was way off. I'll probably have pictures of the fiber glassing effort later.
|
|
martrogers
Mon December 29, 2008 2:48pm
|
|
martrogers
Mon December 29, 2008 2:48pm
|
|
TWOOD
Mon February 2, 2009 1:03pm
Rating: 10
|
Upper control arm alignment brackets installed
Passenger side view toward engine
|
|
TWOOD
Mon February 2, 2009 1:03pm
|
Upper control arm alignment brackets installed
another passenger side view toward engine
Bracket is tight against the shock tower
|
|
TWOOD
Mon February 2, 2009 1:03pm
Rating: 10
|
Upper control arm alignment brackets installed
Passenger side view from above
Note: carriage bolt clear at the rear, but just barely.
|
|
tcrist
Mon March 9, 2009 5:35pm
Rating: 10
|
alignment bracket reversed 1
|
|
tcrist
Mon March 9, 2009 5:35pm
Rating: 10
|
alignment bracket reversed 2
|
|
lovehamr
Sun October 25, 2009 7:38pm
Rating: 10
|
New_headers
BDR headers for FE, check out the ex. flange alignment.
|
|
