bolmida
Fri June 30, 2006 3:25am
Rating: 10
|
|
Eljaro
Sat August 19, 2006 1:05pm
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
These are the parts I made to adapt a Superlite 6 pot caliper to a Jaguar front suspension. It goes with a 12.78" diameter 1.25" thick disc and fits inside a 15" Halibrand style wheel.1 Aluminum plate with two 20mm SS spacers milled on one side and the bolts, two of them with a modified head.
|
|
Eljaro
Sat August 19, 2006 1:05pm
Rating: 1
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
mounted hardware ready to bolt to a Jaguar front uprighr
|
|
ccoe
Sun December 3, 2006 12:06pm
Rating: 10
|
New aluminum top end November 2006!
|
|
ccoe
Sun December 3, 2006 12:06pm
Rating: 10
|
New aluminum top end November 2006!
|
|
ccoe
Sun December 3, 2006 12:06pm
Rating: 10
|
New aluminum top end November 2006!
|
|
Maricopa
Wed February 7, 2007 6:54pm
Rating: 10
|
paint_door
Jaguar Brooklands Green
|
|
1985 CCX
Wed March 21, 2007 5:59pm
|
Vintage Wheel with Adapter
Aluminum wheel with machined hubcentric adapter for Jaguar spindle, forged and polished spinners, center cap, and includes anti-theft option which stops spinner from coming off if wire is not used. Now, I will set out to tone down the shine a bit and change center appearance to gold as per magnesium Halibrand casting.
|
|
1985 CCX
Wed March 21, 2007 6:34pm
Rating: 10
|
Starting to install hubcentric adapters from Vintage Wheel on the CCX
My how the dust settles over and under the car during the winter. Pulled the cover back to start installation of Vintage Wheel pin drive adapters. These parts have been machined prior to shipping to fit perfectly on the Jaguar spindle. Spinners are forged / polished and include Vintage Wheels Safety:Anti-Theft option. This option will not allow spinner to come off without removal of the safety pins.
|
|
blip
Fri March 23, 2007 8:35am
|
Ram S/C
Shelby endorsed Ram S/C CSX-R4000. Factory built by Ram Automotive. Reynard chassis. Jaguar limited slip diff. 351 Cleveland.
|
|
blip
Fri March 23, 2007 8:35am
|
Ram S/C
Shelby endorsed Ram S/C CSX-R4000. Factory built by Ram Automotive. Reynard chassis. Jaguar limited slip diff. 351 Cleveland.
|
|
blip
Fri March 23, 2007 8:35am
|
Ram S/C
Shelby endorsed Ram S/C CSX-R4000. Factory built by Ram Automotive. Reynard chassis. Jaguar limited slip diff. 351 Cleveland.
|
|
blip
Fri March 23, 2007 8:35am
|
Ram S/C
Shelby endorsed Ram S/C CSX-R4000. Factory built by Ram Automotive. Reynard chassis. Jaguar limited slip diff. 351 Cleveland.
|
|
cobrajam
Sun February 10, 2008 6:49pm
|
Final assembly of Jaguar Rear IRS
Still awaiting for halfshaft assemblies. At shop having Japanese U-joints replaced w/ Made in USA ones. 3.73, Auburn Pro Posi, CWI 30sp stub axles, finned aluminum rear cover, adapter, vented rotors, Wilwood 4 piston Dynalites
|
|
Baz
Mon June 23, 2008 5:48pm
Rating: 10
|
Front_suspension_installed_Small_
Independent Jaguar suspension and brakes with adjustable Spax Gas Shocks.
|
|
