Bunkie314
Thu June 7, 2007 10:28pm
|
On the Dyno
Break in and pull tests. Everything went well. Peaked 560 HP and 500 ft-lbs.
|
|
Bunkie314
Thu June 7, 2007 10:28pm
|
On the Dyno
Break in and pull tests. Everything went well. Peaked 560 HP and 500 ft-lbs.
|
|
Rick Parker
Tue June 26, 2007 9:47pm
Rating: 10
|
CVCC run to Bass Lake 6/23/2007
Turnaround point at about 7850 Ft elevation
|
|
fkemmerer
Sat September 1, 2007 7:57pm
Rating: 10
|
Injected Side Oiler
These are pictures of the engine that is going into my Cobra. Its is an all aluminum 427 FE Side-oiler that has been stroked to 482 ci. The motor was done my Keith Craft and it makes 655 hp, 633 ft-lbs of torque.
|
|
fkemmerer
Sat September 1, 2007 7:57pm
Rating: 10
|
Injected Side Oiler
These are pictures of the engine that is going into my Cobra. Its is an all aluminum 427 FE Side-oiler that has been stroked to 482 ci. The motor was done my Keith Craft and it makes 655 hp, 633 ft-lbs of torque.
|
|
cobrajam
Sun November 18, 2007 6:06pm
|
391 FT Steel Crank
knife edged and lightened, went from 75lbs to 65lbs, 3.78in stroke, .010/.010, machined snout and flywheel face to fit FE
|
|
cobrajam
Fri January 25, 2008 5:23am
|
Crank Choices
L->R. 63lb Regular Cast FE Crank, 75lb Steel Cross-drilled Crank, 65lb Steel 391 FT Crank machined at snout and flange to fit FE, lightened and knife-edged
|
|
cobrajam
Sun January 27, 2008 7:34pm
|
FE_FTbearings_Medium_
FE Roller Pilot Bearing on left, FT Roller Pilot Bearing on right
|
|
cobrasnake
Thu September 18, 2008 10:21am
Rating: 10
|
Cobras to the Coast 2008 Ft. Ross
|
|
cobrasnake
Thu September 18, 2008 10:21am
Rating: 10
|
Cobras to the Coast 2008 Ft. Ross
|
|
cobrasnake
Thu September 18, 2008 10:21am
Rating: 10
|
Cobras to the Coast 2008 Ft. Ross
Who says they're all blue?
|
|
cobrasnake
Thu September 18, 2008 10:21am
Rating: 10
|
Cobras to the Coast 2008 Ft. Ross
|
|
cobrasnake
Thu September 18, 2008 10:21am
Rating: 10
|
Cobras to the Coast 2008 Ft. Ross
|
|
Mdman352
Wed October 8, 2008 7:16am
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
Mdman352
Wed October 8, 2008 7:16am
Rating: 10
|
new motor
This is a FE medium riser motor stroked to 454 with a hydraulic roller cam. Dyno results are 470 HP and 564 Ft of torque.
|
|
