fkemmerer
Sun August 3, 2008 6:31pm
Rating: 10
|
ERA 753 - Engine In and Mostly Hooked Up
Here's a picture of our ERA with the egine installed and everything hooked up except for the cooling system, the alternator, and the wiring for the EFI system.
|
|
fkemmerer
Sun August 3, 2008 6:31pm
Rating: 10
|
ERA 753 - Engine In and Mostly Hooked Up
Here's a picture of our ERA with the egine installed and everything hooked up except for the cooling system, the alternator, and the wiring for the EFI system.
|
|
fkemmerer
Sat August 9, 2008 2:39pm
|
ERA #753 - Engine with Accessories Installed
Here's a picture of our engine with the alternator and expansion tank installed.
|
|
fkemmerer
Sat August 9, 2008 2:39pm
Rating: 10
|
ERA #753 - Engine with Accessories Installed
Here's a picture of our engine with the alternator and expansion tank installed.
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
Here's the narrowed 9 inch Ford rear end with its first coat of satin black paint. The rear end has a 3.50 posi center section. And yes, those are 11 inch drum brakes. Hey, this is a budget build.
|
|
RJCCOBRA
Tue December 2, 2008 3:07pm
|
Shell Valley build
Here's a picture of the body suspended on Buddy's lift, waiting to be rejoined with the chassis.
|
|
RJCCOBRA
Fri December 5, 2008 2:25pm
|
Shell Valley build
Here's a picture of the brake proportioning valve and 10 lb. residual pressure valve mounted on the drivers side frame rail.
|
|
RJCCOBRA
Fri December 12, 2008 3:03pm
|
Shell Valley build
Here's the front view of the roll bar which is just back from the powder coaters. J&J Powder Coating in Zion, IL did the powder coating.
|
|
RJCCOBRA
Fri December 12, 2008 3:03pm
|
Shell Valley build
Here's a back view of the roll bar.
|
|
RJCCOBRA
Wed December 17, 2008 3:03pm
|
Shell Valley build
Here's a picture with the side pipes mounted.
|
|
RJCCOBRA
Wed December 17, 2008 3:03pm
|
Shell Valley build
Here's another picture of the throttle linkage.
|
|
RJCCOBRA
Tue December 30, 2008 2:41pm
|
Shell Valley build
Here's the front of the car after we removed the radiator. There was a problem with some work that the radiator shop did and the driver's side tank leaked like a sieve. The good news is that the engine fired and we were able to time it.
|
|
RJCCOBRA
Tue December 30, 2008 2:41pm
|
Shell Valley build
Here's a picture of the under carriage. Hopefully we're pretty much finished with everything under the car.
|
|
RJCCOBRA
Tue December 30, 2008 2:41pm
|
Shell Valley build
Here's a shot of the sleeve that Buddy machined up to cover the joint between the steering column and shaft going to the rack and pinion.
|
|
RJCCOBRA
Tue December 30, 2008 2:41pm
|
Shell Valley build
Here's another shot of the sleeve. Looks great!
|
|
