patrickt
Sun May 18, 2008 6:31pm
|
|
patrickt
Sun May 18, 2008 6:31pm
|
|
fkemmerer
Wed July 16, 2008 11:32am
|
Fluid Reservoirs in Engine Bay
Pictures of ERA #753 in the final stages of assembly. These are the fluid reservoirs in the engine bay. Note the stainless steel lines.
|
|
fkemmerer
Thu July 31, 2008 6:02am
Rating: 10
|
ERA 753 - IAC Details
This picture shows the inside of the intake ports on my TWM stack injection setup. The brass fitting connect to the IAC motor plumbing under the intake manifold.
|
|
fkemmerer
Fri August 1, 2008 2:46pm
Rating: 10
|
ERA #753 - Fuel Lines and Throttle Cable
Final fuel lines and trottle cable hookup on our ERA
|
|
vector1
Wed October 15, 2008 8:51am
|
closed_to_finished_engine_bay_002_Small_
scavenge lines were somewhat difficult to fit
|
|
Cobra #3170
Thu November 20, 2008 6:54pm
Rating: 10
|
Modified Street Car
Packaging #16 Dry Sump lines
|
|
RJCCOBRA
Fri December 5, 2008 2:25pm
|
Shell Valley build
We're done painting the frame and have started running the brake lines. Hopefully, tomorrow we'll get the brake lines finished, the rear end mounted, the front suspension with rack and pinion reinstalled, and the gas tank and fuel lines run.
|
|
RJCCOBRA
Sat December 6, 2008 2:42pm
|
Shell Valley build
Brake lines are run, and front and rear suspension reattached to the frame.
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
|
Shell Valley build
Fabricating brake lines from the master cylinders to the proportioning valve.
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
|
Shell Valley build
Brake lines installed between master cylinders and proportioning valve. A cover was fabricated and installed over the brake/clutch box.
|
|
RJCCOBRA
Mon December 15, 2008 2:47pm
Rating: 1
|
Shell Valley build
Another view of the brake lines.
|
|
RJCCOBRA
Wed December 17, 2008 3:03pm
|
Shell Valley build
The body is back on the chassis, brake lines have been hooked up to the master cylinders, and the throttle linkage installed.
|
|
Ken Williams
Tue January 13, 2009 5:23pm
|
IMG_7187
Brake lines, remote resovoirs, cockpit rear bulkhead.
|
|
767Jockey
Mon March 9, 2009 11:16pm
Rating: 10
|
IMG_3330
First try at bending brake lines.
|
|
