jwoodard
Tue April 6, 2004 5:32pm
Rating: 10
|
Keith Craft Racing
Keith on the left, Tomin the middle acting like he knows what he is doing and Wendel on the left. We tried a 2" spacer but it didn't improve performance over the 1".
|
|
Rick Bagley
Tue May 4, 2004 5:52am
|
Billet Valvetrain Ford FE
Precision Oil Pump MFG.
Roller Rockers, Billet Shafts, and Spacers. 427 Sideoiler.
|
|
Unique580hp
Tue May 25, 2004 1:06pm
|
|
jdean
Sun October 17, 2004 9:37am
Rating: 10
|
Trunk latch, side view
This shows the fiberglass spacer made to mount on the curved surface.
|
|
simon clemens
Mon October 31, 2005 6:14am
|
Boot Hinges SS
Marking the location for the polished stainless steel boot hinges. Aligned the boot lid with spacers and held into place with 2"
packing tape, before drilling holes.
|
|
66rdster
Sun November 6, 2005 7:30pm
|
Trim Piece for Master Cylinders
Covers the spacer nuts used to level the master cylinders.
|
|
JCoop
Wed May 3, 2006 4:29pm
|
|
Eljaro
Sat August 19, 2006 1:05pm
|
12.78" x 1.25" disc and SL-6 conversion for 15" wheel
These are the parts I made to adapt a Superlite 6 pot caliper to a Jaguar front suspension. It goes with a 12.78" diameter 1.25" thick disc and fits inside a 15" Halibrand style wheel.1 Aluminum plate with two 20mm SS spacers milled on one side and the bolts, two of them with a modified head.
|
|
fastraxsg
Fri December 1, 2006 7:14pm
|
ramp
Finally got a pair of proper Lowell lowered rear springs for the roadster, ride height is now about as good as it can get without tweaking the chassis or adding spacers.
|
|
fastraxsg
Fri January 12, 2007 6:35am
|
IMG_7386b
Butt up in the air. Got new Lowell lowered springs but now need to modify chassis so torsion bars don't hit before springs bottom. Had to use spacers to get spring travel but raised body. Major operation required but, now ride is bearable. Local Marvia Cobra, 1989
|
|
patrickt
Thu April 3, 2008 8:10am
|
|
patrickt
Thu April 3, 2008 8:10am
|
|
byroncobra
Fri July 10, 2009 6:43pm
|
|
portmax
Mon December 7, 2009 8:05pm
|
1
my 1991 cardiac cobra,472 ci (460) heavy port job d0ve heads, edelbrock performer rpm cam and manifold,1 inch spacer 850 holly w a 30 cfm stub stack. jacobs ignition, new 3 inch i.d. mufflers,loud??!!!wow!!,four speed ,2.5 gears and still run an easy mid 11s on street tires. fun car astoundingly fast and stable. best recorded mpg 26.5
|
|
Tom Howland
Sat January 1, 2011 8:43pm
|
weber spacers
Lexan insulators
|
|
