SACoupe
Sat February 3, 2007 11:38pm
Rating: 10
|
BDR at Classic racing in SA Recently
Tony Martin Racing His lightweight BDR at Zwartkops with David Piper and the rest of the historics crowd. The BDR was running rings around everything else, so much that they handicapped him by a LAP for the Main race. He was leading untill a classic Jag Knocked into him.
|
|
rocket7171
Sat April 14, 2007 5:46am
|
|
rocket7171
Sat April 14, 2007 5:46am
Rating: 10
|
|
rocket7171
Sat April 14, 2007 5:46am
|
|
Dwight
Tue September 25, 2007 3:32pm
|
prop_rod_2_
prop rod with O rings
|
|
cobrajam
Sun November 18, 2007 5:45pm
|
FE Quick Time Bellhousing
comes complete with aluminum block plate, 2 different fork mounts, 3 different diameter trans rings, all attaching hardware
|
|
cobrajam
Mon November 19, 2007 6:38pm
|
Jag IRS Awaiting Assembly
Auburn Pro 30spline Diff, CWI chromemoly 30spline stub axles, CWI/Wilwood Dynalite Vented Rotors, XJ-6/XJS housing, 3.73 Ring and Pinion
|
|
fsstnotch
Sat December 1, 2007 9:47am
|
|
fsstnotch
Sat December 1, 2007 9:47am
|
|
TWOOD
Fri March 14, 2008 4:34pm
Rating: 10
|
door latch release linkage
View of lower end of linkage. Very much the same as drawing that Art Burtt has posted. Spring is secured to wheel well liner with a machine screw, short lenght of safety chain, a key ring. Light colored material behind the safety chain is insulating foam.
|
|
double ugly
Thu May 22, 2008 11:23am
Rating: 10
|
indy
One of the three rings Tim has earned at the Speedway
|
|
1985 CCX
Sun December 21, 2008 9:27am
|
Original 60's screens
Was lucky to find these original side mount screens. These were the type used in the 60's which differ by full winding of the screen versus tack weld to the ring and no pop snaps, they mount via SS side brackets and funky knobs.
|
|
SD5805
Tue April 6, 2010 4:55pm
Rating: 10
|
New Look
Rally Lights installed on Bumper Ring and Numbers attached
|
|
Wbulk
Fri May 7, 2010 11:44am
Rating: 10
|
Ball Joint Seal Ring
This is a Fix for A Arms that use the Chrystler ball joint without a seal groove machined in. This one was from B and B. A 3/16" steel ring was added to accept the ball joint seal. It was tack tig welded on the outside edges. The rings were cut on a water jet by Kirkhams Motorsports. Barry McGill can also do the fix.
|
|
Wbulk
Sun May 9, 2010 9:03am
Rating: 10
|
Ball Joint Seal Ring
A fix for A Arms shipped without the ball joint seal groove machined in. Ring added to accept a Chrystler Ball Joint Seal. The 3/16" thick rings were cut on Kirkhams Motorsports water jet. Barry McGill can also do the fix. The bad thing was B&B sent me the wrong arms that I paid to get fixed.
|
|
