Wbulk
Fri June 11, 2010 5:56pm
Rating: 10
|
Upper Shock Mounts
New upper shock mounts tacked into place. These allow for a longer shock to be used.
|
|
jcraigau
Mon June 28, 2010 5:26am
|
Prop Shafts
with uni's in place
|
|
Z-linkCobra
Mon October 11, 2010 6:21am
|
Filter mount
Took a peice of 2" aluminum pipe and made this filter mount. The filter slides in and there are 2 set screws on either end ring to hold the filter in place. I didnt like the way the band clamps looked.
|
|
Double Venom
Sun January 30, 2011 9:05am
|
MC's in place
right-3/4" Bore - front brakes
center-3/4" Bore - rear brakes
far right or fender side 7/8" Bore clutch
|
|
Double Venom
Sun January 30, 2011 9:05am
|
Reservoirs mounted
Bolted in place-As you can see the hood prop rod has to be placed to the right side of the fender!
|
|
Hawkeye
Thu May 26, 2011 9:31pm
Rating: 10
|
First Place in class @ BC Custom show
First Place in class @ BC Custom show
|
|
Beastly
Mon February 13, 2012 2:28pm
|
really am going to try and improve this
dash before stickers in middle. may place two more gauges
|
|
52chevyred
Tue May 1, 2012 4:15pm
|
1st Place in the '60-'69 Class
I won 1st Place in the '60-'69 Class at the Moore Station Village car show in Dublin, Ga on 4-28-12.
|
|
52chevyred
Tue May 1, 2012 4:19pm
|
Cobra at Moore Station Village, Dublin, Ga
This was my third car show and won my third trophy: 1st place in the '60-'69 class.
|
|
Roush #1
Fri May 11, 2012 4:10pm
Rating: 10
|
Big Bend Open Road Race 2012
Fourth place finish in class. Highest finishing Cobra in BBORR 2012
|
|
ACO05
Wed July 4, 2012 7:09pm
|
Australia Classic 2012 First Place Trophy
|
|
cobrajeff
Fri December 28, 2012 3:37am
|
Pantera at Street Machine Nationals
I drove my Pantera to the Car Craft magazine Street Machine Nationals in Niagra Falls, NY, where it won first place in the Sports Car class.
|
|
justcobra
Sun January 6, 2013 7:25pm
|
RMC Series 3
Doors opened with red seats in place.
|
|
LightNFast
Mon February 18, 2013 9:33am
Rating: 10
|
FIA_Suitcase_Study1
It’s documented that (2) AC factory cars were prepared with FIA suitcase "dimples" (See Photos). The second modification was to enlarge the trunk base to allow the suitcase to fit upright (vertical) and further down into the trunk as shown. If you look closely at the photo you can see the suitcase also fit horizontal and was held in place with a “bungee cord”. You can also see the bolts protruding out the bottom of the suitcase which originally held the suitcase upright. I think this also explains why some of the FIA cars had dimples while others didn’t.
As for the actual size of the suitcase – FIA Historic Racing Championships - Appendix J. Both 1964 and 1965.
State:
“270 - Luggage trunk
A covered space being an integral part of the coachwork but outside of the space occupied by the front seats, large enough to receive a trunk of
65 cm X 40 cm X 20 cm. minimum, besides the spare wheel, tools or the folded hood, shall be provided, excluding the spare wheel, tools or removed canopy.”
|
|
bannishg
Tue July 23, 2013 6:55am
Rating: 10
|
Hemmings Motor News, March 1985
The ad was placed by the Shelby American Museum in Texas.
|
|
